LETS SEE YOUR WAVES?

[RVR-RAT 269]

Cleaner lip all the way to the front, that's what mine is lacking. What is your trim tab set at? Do you think the rudder key makes a difference? The 244 has a 14" prop with the cut away in the hull, correct?

 

The darksiders all get face shots when they're up close in the pocket. Not sure if I should try the mud flap or the winged plate to fix it.

Trim tab set at around 25% that seemed to work pretty well. I have the rider profile set to start out at 0%, but noticed if I tweak the trim tab down a little it helps. I did adjust the rudder key to a 45 degree angle, and it did help clean up the goofy side a bit (obviously I have LH rotation) yes to 14" prop. We were in fairly shallow water in that picture around 10 feet deep

Edited July 9, 2013 by RVR-RAT

[duramat 462]

Rough windy days at the river a couple weeks ago. The best we could get before we were blown off the water. A picture of my sons friend.

 

CLEAN!!!

 

 

Moabi surf.jpg

 

 

 

[BillC4 24]

Here was ours from this past weekend. For reference, my son is 6'2" for size of wake. The other pic is a good view of a proper wake on the good side of the boat. Don't know hey anyone would try the other side.

[DarksideR 1,679]

Yeah Bill! Nice goofy wave!

Lets hear your setup.

[LKASurfing 53]

This is my new & improved Goofy Wake! This is a LH prop Boat!

 

Picture taken last night!

 

[RVR-RAT 269]

Nice looking wave !

[adambomb2000 35]

Were you really looking at the wave RVR? lol

 

Haha, but in all seriousness - being a darksider, I agree...nice wave! Super clean face.

 

LKASurfing, what is your setup, speed and prop?

[truekaotik 458]

Terrible pic from last fall, taking the rope out as far as I could and still had push.. been to choppy out this year so far, so havnt gone with a camera yet...

Edited July 10, 2013 by truekaotik

[LKASurfing 53]

Were you really looking at the wave RVR? lol

 

Haha, but in all seriousness - being a darksider, I agree...nice wave! Super clean face.

 

LKASurfing, what is your setup, speed and prop?

 

 

LOL

 

Biggest thing is the Port wing plate I added. The design was from another board member Mac. Best mod yet!!

Prop is the stock High altitude Prop

speed is 11.2

Trim is 100%

Weight is actually very little. Factory QFS (500lb) Rear PnP 750, factory mid ballast set up but with a 400lb bag & then about another 100lb in a brick! under the seat.

two kids in the boat!

 

I know I can add more weight and go bigger, but I am super stoked to have that kind of wake with an awesome drive for all under the seat! Plus we can ride way far back. I could show my Port wake, but it looks great like everyone else's! I am proud of that GOOFY wake since, I am GOOFY!

[mac19 4]

Here is what I have going on so far.

 

-port wing mod

-trim at zero

-star quickfill

-star mid

-750 in star engine compartment

- 750 on the floor against star seat

-10.5mph

-still need to try tuning rudder.

[SMITH 2]

Here is what I have going on so far.

 

-port wing mod

-trim at zero

-star quickfill

-star mid

-750 in star engine compartment

- 750 on the floor against star seat

-10.5mph

-still need to try tuning rudder.

image.jpgimage.jpg

What is the water depth? Less that 10' will impact your wave..

[bobback 3]

Were you really looking at the wave RVR? lol

Uhhh...what wave?

[mac19 4]

 

What is the water depth? Less that 10' will impact your wave..

Were riding in about 25ft of water.

[SMITH 2]

Your set up seems really close to LKASurfing's set up, yet his looks a lot deeper and taller. Maybe put the 750 up on the seat, with it sitting on the floor it maybe too close to midship. Starboard is crazy sensitive. Or when you get your 1100lb'er in the back locker you'll be set.

[Nick213 583]

A video of my little DD wave.

6 people in the boat

2 in bow

1 in observer seat

2 back seat

Driver

400# rear locker

400# port floor

 

[RVR-RAT 269]

Nice Nick Good looking wave !!!

[RVR-RAT 269]

REGULAR SIDE

 

 

 

 

GOOFY SIDE

[SMITH 2]

Wow. Awesome Starboard.. Cant let my wife see that..

[Spud 7]

Nice vids brothers !! Can't wait to check that thing out RVR, and Nick we need to hook up next time your down.

[Nick213 583]

I'm hoping to at the end of the month when RVR is there. He coming up day day I'm leaving but we should all be able to meet up that Sunday