Jbeams2
-
Content count
19 -
Joined
-
Last visited
Everything posted by Jbeams2
-
Hey guys, I am fairly new to wake surfing, but have been wakeboarding my whole life. Just bought an 04 enzo sv230 and trying to dial in my surf wave. Looking to buy a new surf board to help progress my skills. I feel my current board is too big. I am 6 foot and 175-180lbs. Currently riding a hyperlite broadcast 5'4". Leaning towards a hybrid so I can learn some spins, but also airs. Any suggestions on the best board and board size for myself for the money would be greatly appreciated! Thanks!
-
Does anybody know where the coolant line is on a 2004 Centurion Enzo SV230? I am winterizing the boat and didn't know if this was the best way to funnel antifreeze into the engine block. Thanks!
-
Winterization Checklist for 2004 Centurion Enzo SV230
Jbeams2 posted a topic in Centurion Boats General Discussion
Winterization Checklist for 2004 Centurion Enzo SV230 Prior to this boat, I had a direct drive. I winterized each year on my own. Could anyone share their winterization checklists for a V-Drive? Also any information for draining/winterizing ballast. I have been reading some posts about draining the heater as well, but I wasn't sure if my 2004 model had that. Any information would great! Thanks -
Winterization Checklist for 2004 Centurion Enzo SV230
Jbeams2 replied to Jbeams2's topic in Centurion Boats General Discussion
I have an 04. How do I tell if it has a heater? -
Guys, Does anyone know the location of the fuse panel in a 2004 enzo sv230? Thanks
-
Guys, I am in the process of removing the 2 Factory hard tanks out to replace with sacs. They are each a 22 gallon tank. I got the port side out no issue, but I’m stuck with the starboard side. Any help would be appreciated. It’s an 04 Enzo sv230. Thanks!
-
Guys, I am in the process of removing the 2 Factory hard tanks out to replace with sacs. They are each a 22 gallon tank. I got the port side out no issue, but I’m stuck with the starboard side. Any help would be appreciated. It’s an 04 Enzo sv230. Thanks!
-
Guys, I am in the process of removing the 2 Factory hard tanks out to replace with sacs. They are each a 22 gallon tank. I got the port side out no issue, but I’m stuck with the starboard side. Any help would be appreciated. It’s an 04 Enzo sv230. Thanks!
-
Hey guys, Anybody know the size (diameter) of the 2004 enzo sv230 Transom Drain plug. Wondering if it was a 1/2 inch? Looking into getting one of those drain plug underwater lights. Thanks!
-
Hey guys, Anybody know the size (diameter) of the 2004 enzo sv230 Transom Drain plug. Wondering if it was a 1/2 inch? Looking into getting one of those drain plug underwater lights. Thanks!
-
Can you do airs and skim type spins on a mongrel?
-
I am located in Louisville Ky. Thanks for the advice man. Very helpful. I am looking for somewhat of a hybrid. Something I can do some airs on but also skim and spin. Any suggestions?
-
Is the Neo more of a hybrid or an airs board? Being 6 foot 175, you think I need a 4'6"?
-
My current board that is 5'4".... could the large board size cause me issues with drifting back out of the pocket and not being able to pump back into the wave?
-
2004 Centurion Enzo SV230 SURFING?
Jbeams2 replied to Jbeams2's topic in Centurion Boats General Discussion
Thanks for the input. My plan is to remove my 200 lb factory tanks and slide my 540s into that spot. They will fit and are already plumbed in because a have a T connector off of each pump connecting 2 hoses. Then going to put an 800 in each rear locker. I can get 2 ronix eight 3's 800 lb bags for a really good price, so I think I am going this route instead of the enzo sacs. -
Guys, I am new to the forum as I just bought my first Centurion a couple weeks ago. It is a 2004 Enzo SV230. My current setup is the factory hard tanks under each side of the boat and 2 540 lb bags (one in each rear locker), plus a delta mission surf shaper. Those are all plumbed in. I own 2 350 lb bags that are not plumbed, but can be filled with a separate pump. Any ideas on the best weight set up to create a good surf wave with enough push? I am still struggling with throwing the rope and consistently staying in the pocket. Once I drift back, it is tough to push back forward. I am 6 foot, 180 lbs and riding a 5 foot 4 inch hyperlite broadcast. Any thoughts on a good board for me? I am fairly new to surfing, but have been wakeboarding my entire life. Thanks for all the input.
-
Guys thinking of upgrading my ballast. I have an 04 Enzo sv230 Currently running factory mid ship ballast which totals about 400lbs. I’m running a 540 in each rear locker and a plug and play 350 in the bow and one surf side. Thoughts on what I should upgrade to? Looking to get a longer wave with a little more push. Tossed around the idea of 2 Enzo sacks but they’re so expensive. If anyone has some they’d like to sell and ship, I can Venmo!? Thanks!
-
2004 Centurion Enzo SV230 SURFING?
Jbeams2 replied to Jbeams2's topic in Centurion Boats General Discussion
Thanks Troy! If I list the boat, I would only have 540 in the rear and about 200 midship with my factory tank and the 350 on surf seat and 350 in bow... would that be enough? Tossed around the idea of replacing all ballast with 2 Enzo sacs but they are expensive. Any other suggestions? -
Guys, I am new to the forum as I just bought my first Centurion a couple weeks ago. It is a 2004 Enzo SV230. My current setup is the factory hard tanks under each side of the boat and 2 540 lb bags (one in each rear locker), plus a delta mission surf shaper. Those are all plumbed in. I own 2 350 lb bags that are not plumbed, but can be filled with a separate pump. Any ideas on the best weight set up to create a good surf wave with enough push? I am still struggling with throwing the rope and consistently staying in the pocket. Once I drift back, it is tough to push back forward. I am 6 foot, 180 lbs and riding a 5 foot 4 inch hyperlite broadcast. Any thoughts on a good board for me? I am fairly new to surfing, but have been wakeboarding my entire life. Thanks for all the input.