Search the Community
Showing results for tags 'bilge'.
Found 3 results
-
2007 c4 typhoon single battery, no auto-bilge?
codo511 posted a topic in Centurion Boat Accessories, Electronics and Modifications
Just picked up my 2007 c4 typhoon after coming off a natique SuperSport because it’s 2’ longer, and a 1’ wider w/ built in ballast. we are very excited but noticed a couple of things and wanted to see if others made modifications, or if it has been an issue at all for the crew: 1) it only has a single battery: which so does my truck so big deal right? But all other boats I’ve been on have had a starting battery and an accessory battery. This way you could switch the battery to just acc and Moore your boat listing to music w/o worrying about a dead battery - is this something I should have wired in? also 2) it doesn’t seem to have a float bilge just a standard bilge. My old boat had 2 bilge a manual bilge and a float bilge that would kick on if water reached a certain level in the compartment that I could always leave on so that when I left the boat moored at the slip I wouldn’t have to worry about a storm if the cover blew off etc am I over thinking this? - thanks!!! -
Hi all, i have a 1995 Centurion Lapoint, with two air intakes below the windshield, the previous owner installed a 3 inch fan on one of the inlets, but it got filled with water and drowned... I want to restore the boat to it's original set up, so does anyone know what the set upt was at the time, could it have been just two 3 inch flexible hoses going to the engine compartment ? There is no outlet for a bilge fan and i would like to install one, any suggestion on where to mount it ? Thank's !
-
How to plug up your bilge pump, then fix
DarksideR posted a topic in Centurion Boat Maintenance, Performance, Troubleshooting
Last month we were having a great old time out on the water when I noticed a funny sound. Turned out that the bilge pump wasn't pumping and there was a lot of water in there. Fortunately I had installed an auxiliary line to my ballast system. Used it to suck the water out. The next day it was time to contort my old body into a ridiculous position in order to get at the bilge pump to try to troubleshoot. Newer model Centurions have the bilge pump mounted in THE MOST difficult place to get to. Right behind some angle iron piece that I believe the rudder mechanism mounts to. Anyway, I pulled out the pump and turned it upside down. The float triggers the pump to fire up, but the little plastic impeller ain't spinning. There's one screw holding a guard/body to the rest of the housing. Here's what I find. The metal stud that spins the impeller was completely rusted away... non existent. And all that black junk was crammed in around the impeller. Turns out that black stuff was bits of a serpentine belt. Immediately I checked out my belt... it was perfectly fine. So I guess the previous owner had one shred on her and never cleaned up the bits. Or whoever did her maintenance. So, I cleaned up everything I could see and reach and proceeded to install a new bilge pump. Next time out, the pump worked perfectly. Now, weeks later, I take the boat out again (second time since install) and... bilge pump no worky. FML. So today I pulled the new pump back out and it works perfectly in my hand. So now I'm thinking maybe the hose is plugged. So I disconnect the hose from the pump and shove it into a milk jug. Grab the garden hose and crank it on and put it into the side thru hull for about ten seconds. Seemed to flow, so I checked the jug. Yep, full of water. Pour it out and find a full handful more of the shredded serpentine belt! Put it all back together and now have my fingers crossed that that was the last of it. Thought about parking the boat on a hill and flushing the bilge, but that's easier said than done. Finding a hill is no biggie. Having water supply at said hill is another story. Cheers.- 19 replies
-
- 1