Jump to content

Kevin Baugh

Crew
 View profile  See their activity

  • Content count

    2,325

  • Joined

  • Last visited

  • Days Won

    17

Everything posted by Kevin Baugh

  1. So post those pictures of rare Centurion Models This is a 1990 Centurion Falcon barefoot with Suzuki outboard

  2. 2005 vs. 2006 Avalanche C4

    Kevin Baugh replied to Shane MT's topic in Centurion Boats General Discussion

    Avalanche remain unchanged until the 2010 model year
  3. The Escalade is the base model of the Avalanche so heck yeah you can surf it the walk through model is a problem if you want to surf the starboard side but there is a tone of sauce on the port side for ballast

  4. 07 Elite V C5 or 07 Lightning C4

    Kevin Baugh replied to Hdrk2004's topic in Centurion Boats General Discussion

    Lightning is a package for the elite v c4

  5. Speed Control on 2010 Enzo 240 SV

    Kevin Baugh replied to Donnieb's topic in Centurion Boats General Discussion

    You don't need the display my nephew has the same boat dash and year. his Zero off works fine with one exception you can't just slam the throttle down it will not lock in if you do just take it up to the speed and it will lock in. When he first got it he did have to have the gps antenna replaced.

  6. 2010 speed sensor problem

    Kevin Baugh replied to Rodzoo's topic in Centurion Boats General Discussion

    What engine do you have Mercs did not use Zero off. If you have a Merc you probably have a Perfect Pass that uses a paddle wheel
  7. this is what I ended up doing thanks
  8. I really need some help!! I am added 2 reversible ballast pumps to my 2012 SV211 and I can't figure out where to mount these pumps can someone with a 2012 SV doesn't have to be a 211 please send me in the right direction where are you pumps mounted and if possible can you take some pictures of your pumps. I can't finish my install until I can mount these pumps
  9. They did not lengthen the boat they just renamed it. I also had a SV216. You might notice that the SV216/SV220 hull is very similar to the new OPTI-V HULL so the suck gates should work great. https://drive.google.com/open?id=1Z7AfhxB8JbMNY8K6g_PQ529KPPGQuKVX
  10. I am looking for a High resolution image of the Centurion Helmet have not had any luck with Google
  11. Any way I can get this the link no longer works

  12. Pro-Vision II manual/info

    Kevin Baugh replied to crimson850's topic in Centurion Boats General Discussion

    Looks like my old link stopped working try this https://drive.google.com/drive/folders/13usLe7fKwn1AjO7vMO4NhpiZ4UKB7JDk?usp=sharing
  13. recessing the metal plate seems like a feasible idea but I personally would not try changing the angle of the drive shaft

  14. Barefoot Warrior looking for info

    Kevin Baugh replied to CenturionCT203's topic in Centurion Boats General Discussion

    Sure this is my 85 https://drive.google.com/file/d/1pZNl9UcEQoLYdknQXSFeNsEmpnGCzcXu/view?usp=sharing This is my 86 https://drive.google.com/file/d/1o7att_AaOzodIeOW9tc1KOzkRCn48Loy/view?usp=sharing
  15. That sounds like a bad steering cable they feel free when you're not under power but when you have some load on it they're hard to turn

  16. Barefoot Warrior looking for info

    Kevin Baugh replied to CenturionCT203's topic in Centurion Boats General Discussion

    I had an 85 and 86 the 86 The boat changed in 86 to look like the pictures you post in 86 the deck changed and they added an hard frame windshield before that they had plexiglass windshield

  17. SV233 - wakeboard wake

    Kevin Baugh replied to Chexi's topic in Centurion Boats General Discussion

    the trim tab can clean up or washout the wake out depending on where you have it set I usually have main about 25% or so

  18. SV233 - wakeboard wake

    Kevin Baugh replied to Chexi's topic in Centurion Boats General Discussion

    How fast are you going? My experience is you have to go 22mph to get a clean wake on both sides
  19. on the back of the gauges there is a rotary dial with numbers on it and a small screw driver slot it is probably set wrong try moving it not sure what it should be set at it has been toooo long ago
  20. I have a 2012 Enzo SV211 I am adding some ballast bags and want to plumb them in has anyone done this I want to integrate it to the Provision II does anyone have any experience with this
  21. Welll those are all over the place
  22. I recently posted this and have recieved no reponse I have not had any luck getting replacment skins from Centurion Has anyone used this company https://www.copycatupholstery.com or a company like it
  23. I have not had any luck getting replacment skins from Centurion Has anyone used this company https://www.copycatupholstery.com or a company like it

  24. Who can explain the 2012 Ballast system

    Kevin Baugh replied to Kevin Baugh's topic in Centurion Boats General Discussion

    one more question where are the thru hull fittingd mounted
  25. Who can explain the 2012 Ballast systems? I have and understand the Quickfill. How is the pro ballast plumbed? I can see that the pro ballast can be turned on in the Provision II. how was the plug and play plumbed? could the plug and play be controlled by the provision II?
×

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy..

  I accept