brads2002

Great thank you.

Very cool, thanks for the info. Good idea and it would save me a little funds on setting up another pump and switch. Also glad to hear the Johnson pump is what you are running. Why do the bags need a vent? Is it so they don't collapse when you drain them out?

cool thanks for the advice. with that being said if going the 2 bag direction i am guessing it would require 2 pumps and switches? I think i can get a decent sized bag under the spotter seat. There is a lot of room under there.

Here are a few pictures of the boat. Had a few more but can only upload 200KB and couldnt post a shutterfly link? Thinking of starting out with a wakeboard only setup and adding on from there. The wakemakers reccommended 800 pounds in the storage compartment and a johnson reversable pump with 1" line. What do you guys think? I dont have a current through hole, what i though was is the impeller for the speedo pickup (intelligent tri) Speedo doesnt read accurately so need to dig in there too.

Amazing, small world! I will be peeping across the way and stop by next time i see you out there. I have a little Whaler I snoop on the sandbar activitys with.

Well look at that! Next time you are near the sandbar keep an eye out for a black supreme out on a moring opposite side of the lake just outside of the no-wake zone. That is the boat in question. Would love to hook up for a surf. Thanks for the welcome and stop by any time.

Unfortunately not at the lake today (its 90 here in NH) but will snap some later this week.

Hello, A bit new to the Supreme world and looking for some help. The family has a 2007 220sp non wake package. It looks like part of the work is done. It has a ballast full/empty switch and there appears to be wiring in the rear storage compartment. There may be wiring under the spotter seat but i havent crawled under there yet. There is also a port next to the bilge pump, its capped and has what looks like a vaccum line running from it. From the little information i could find they outfitteded this boat with a wake package. Does anyone know if there is a bolt on kit for this boat? I have a call into Supreme to see if they offer. The boat is direct drive. Any other thoughts on this for a non factory setup? I havent sacked out a boat before but am mechanically inclined and excited to take on the project. Thanks in advance. Brad