lleebo

Johns Sunroof has a good tinter. They are at Sante Fe and Bellview,

Thats what I thought. Any recomendations on a replacement head unit? Running 2 amps, sub, 4 in boats and 4 wet sounds on the tower.

We had a huge storm come up and I believe rain got into my head unit on the dash. Any chance of survival for this unit. It is a JBL unit with a CD player. Just wondering if there is some type of fuse inside, fuses good to unit but no power.

The clear hose is for my ballast pump. What I really need is the fitting that would go into the fill valve. It looks like a quarter turn quick connect but I cant seem to find any info on it

The hole is for the cocktail table, I thought i would just cut out the stem but I might cut around the base. The color is Luna silver and it took over a month but Ken was awesome in getting it delivered. One thing I was not happy about is how it fits around the seat. I think those seat mounts can vary and mine was off quite a bit.

I recieved my new flooring today!! No more musty carpet smell. Shout out to the Crew Admin, you guys rock!

Here are pics of the fitting I am talking about. Any help with this would be great.

I'll post pics this week at the lake. The motor is a black scorpion

My 03 avy has what I believe to be a fresh water flush from the factory. It looks like a quick fill connector on the port exhaust manifold, is that what this is? I was wondering if I could use this instead of a fake a lake. Any thoughts?

N8, I just ordered two of these ball valves that I did not need for my boat. They are 12v 1" normally closed. I have about $50.00 each in them. Let me know if your interested in them.

They are shipping them to me, should have the around the 23rd. I will post specs when i get them but they are supposed to be 1" closed at idle 12v.

Thanks for all of the input. I thought that I need relays to be able to reverse the pumps and use the switches that are factory installed, isn't that correct? I am using two pumps for two bags, although my Avy is a walkthru so I may install a bypass so I can fill my port sac with both pumps. I thought you had to use a ball valve to keep water in the sacs but it sounds like the pumps will hold the pressure so it looks like i have two electric ball valves for sale if anyone needs them!

I'm swapping out my pumps on my 03 avy to two johnsons and i was wondering about installing electric ball valves. My question is since i am installing relays to reverse the pumps how do i turn on the ball valves with the same switch? Does it matter where in the line the ball valves go?

I had this happen on my boat as well. I found a blue plug that was broke off and that side of the block did not get drained. I replaced the freeze plug with a a expandable freeze plug. They work good for places that are impossible to get to on a boat without pulling the motor. My plug was in the bottom of a brass Y used for the water temp sensor. Better check as all block drains are below the freeze plugs.

Thanks Wylie. I am planning to put shut off valves right after the transom, do you think i need ball valves by the tanks or will the pumps hold the water pressure and keep the sacs full?