Jump to content

chinocat

Crew
  • Content count

    31
  • Joined

  • Last visited

Everything posted by chinocat

  1. FI21 Questions

    We have a 20 Fi21, great boat and we love it. If you run with a big crew of folks you might like the 23 better for room, but we run anywhere from 2 to 6 on board. Lots of power in the motor, don't worry about that! We went for the 21 vs the 23 for storage size and what we have to store the boat in. No regrets for us. Still a great wave. Very happy with the boat.
  2. LETS SEE YOUR RIDES

    Said goodbye to our 2003 Elite V 😢 saying hello to our brand new Fi21!
  3. I have a 2003 Elite V and I just changed the steering cable on it. If you have a little help, you should be able to do it in less than an hour! All you have to do is remove the cotter pin and bolt where it attaches to the rudder, there is a 1 1/8" nut to loosen off forward of the rudder about a foot and a half. (I removed the two cooling hoses off the water pump to make a little more room) and then tie a rope to the cable where the pin goes through. Undo the four bolts at the steering wheel and have someone help feed the cable forward as you slowly pull it from under the starboard front seat(works best for angle going through he belly of the boat). When you feed it back in have someone way out front with the steering wheel end and feed it back through with via the front seat opening and then it is easy to get the wheel attachment part back where it belongs by passing it up and under the dash. Then just tighten and put everything back together. A quick explanation but it really was not hard to do.
  4. We have a 2003 eliteV , run 750 in the rear locker, centre stock tank full, about 400 under left seat and about 350 in the nose on the left side with a 400 lbs sack not quite full . Works great. Thinking about trying that mission delta wake shaper and that might make the final touch to make a really nice wake.
  5. Howdy all. My starboard locker gas shock packed it in, and I says to myself, self "take a pic" of the part number and when you go home get a new one! Of course I forgot! Anyone happen to have a 2003 Elite V in there close proximity that would be able to pass on a part number? Thanks Brant
  6. Pull the trigger! I am a fellow Calgarian, have a 2003 Elite V. Very happy with our boat and able to surf no problem behind it. The goofy wave is a little tricky to make but a regular one is not a problem. Definitely need some fat sacs though. We have 2/750 lbs for the lockers, 2/260 lbs for under seats or bow, and 1/150 lbs brick for wherever we need it. The newer ones also have the newer hull which helps with the wave making! Good luck and happy surfing! Not as pretty as a bigger boat but plenty of fun! Brant
  7. Hi all, just curious, has anyone ordered a cover from Cory lately at Evolution Covers. If so, what has been the timeline for completion and delivery? Thanks,
  8. She could always teach herself to ride none goofy! That's what my wife did. I'm just sayin.
  9. We have an 03 Elite V and I just ordered a cover from Cory at Evolution covers. He is great to talk to on the phone and I have seen nothing but positive comments. Have not received it yet but will comment when I get it.
  10. Out of curiosity could one just add a sprinkler valve after the pump on the drain line and wire it up with the pump?
  11. Quick question for you? Which fly high sac did you use in the bow and under the port seat? That is almost the same thing that I would like to accomplish as well. thanks Brant
  12. Anybody with a similar boat have any sacs under the port side seat and under the seat s in the bow. If so what sacs have you found that fit well and would work well to be plumbed in for a surf ballast setup?
  13. Now that is why I love this forum...I have been festering over what might fit for a week now...thought this morning awe hell just post it on the forum. Come back at night and tonnes of information....if only it worked that way at tax time
  14. Thanks all, Of course the boat is six hours from where I live and its snowing like a bugger....might pick a different weekend to make that trip
  15. Speaking of wind dam's, where would a guy find one of those?
  16. Hi all, Our boat also did not come with cleats(2003 Elite V), Have four nice centurion ones in had and am ready to install them...found the backing that was mentioned? Problem 1: They put decals pretty much right over top of the location of the backing! So, I am thinking I will just alter the location rather that pealing off the decals (they are centurion decals so I would rather keep them) ...leading to problem 2: I will need to add some backing! I have a couple of ideas but thought I would go to the ever-wise public forum to see what else was out there for ideas/suggestions for backing... what do you all think?
  17. If you look back through this topic you will find a nice step by step guide to changing the impeller, i used it last year and it worked great. this should take you to it. http://www.centurioncrew.com/index.php?showtopic=2248&st=0&p=43133&hl=+impeller%20+change&fromsearch=1entry43133
  18. Fresh Air Exhaust system

    Just curious??? Has anybody else inquired about at FAE System....just wondering if the deal has inspired anyone?
  19. I emailed Shell and it took her about a week to get back to me....my email ended up in her junk folder as I was not a contact of her's. I suspect that the same thing has happened to you. 209-384-0255 is the phone number down there...You might have better luck with that. I just ordered some parts from them and once my email came out of the junk folder the replies came quickly...they were great to deal with. Brant.
  20. Fresh Air Exhaust system

    Hi all, I have been in touch with Larry at FreshAirExhaust.com My wife just happened to be in the area and is picking one up for me.. ..I was chatting about the forum and he has offered up a discount of $50.00 off FAE system. He said just call or email him and mention the centurion crew forum, he is looking for a minimum of three orders for the discount and I am sale number 1... For those that are interested here is some information how to contact him. Larry Mann mail@boatpipes.com FreshAirExhaust.com 512.647.7321 For myself he was always very quick to respond to emails and very helpful in getting a FAE system all ready to go for us as my wife was only in Texas for a couple of days.
  21. Fresh Air Exhaust system

    I am thinking of ordering one, anyone else in the Alberta area interested....could do a little group buy?
  22. August picture thread

    Shuswap Lake, BC August, 2010
  23. Congrats on the new ride....we have an 30 Elite V and have no problems surfing behind it....i find the speedo can be fine tuned for a low or higher speed but usually is not accurate at both...I just use the gps for speed now and it works awesome... happy surfin
×

Important Information

By using this site, you agree to our Terms of Use.