-
Content count
78 -
Joined
-
Last visited
-
Days Won
8
Content Type
Profiles
Forums
Gallery
Member Map
Store
Calendar
Classifieds
Everything posted by 2ndtimearound
-
V226 Prop/Bilge Questions
2ndtimearound replied to kmul38's topic in Supreme Boat Maintenance, Performance, Troubleshooting
I run a 1433 on my 2013 V226. No way it would hit 40 mph (IRC- around 34 mph or so max, unloaded) but it does extremely well loaded down 4k + people for surfing. Runs about 2800 rpm in that mode 11.2 mph. -
Factory Boat Cover longevity
2ndtimearound posted a topic in Supreme Boat Maintenance, Performance, Troubleshooting
I'm curious how long the factory boat cover lasts. My boat sits out about 5 months, 2 of those months are very wet via rain and 3 pretty good sunny months. The canvas boat cover on my previous boat lasted 19 years before it dissolved. It should have been replaced about 5 years sooner but I kept patching and gluing it back together. The V226 cover doesn't seem as thick or durable and is much bigger and different material than the last one so I'm wondering roughly how many years on average these things last. -
Factory Boat Cover longevity
2ndtimearound replied to 2ndtimearound's topic in Supreme Boat Maintenance, Performance, Troubleshooting
So I received the new cover. Anybody know how the pole support strapping system is supposed to work? No instructions in the box and I don't know what all these straps are supposed to hook to. Anybody? -
Factory Boat Cover longevity
2ndtimearound replied to 2ndtimearound's topic in Supreme Boat Maintenance, Performance, Troubleshooting
Thanks for the replies. I take care of the covers similar to InfinitySurf but not to that extreme. I clean it and spray waterproofing on it. My boat sits out on a boat lift in the sun/wind/downpours as we aren't allowed to have boat lift covers. I tent the cover and it does a pretty good job of not pooling up as long as I make sure it's tented properly. I cheat and throw an old fat sac seat filled with air in the front instead of messing with the pole up there. That works really well. So for insurance sake I was able to find a brand new/unused factory cover yesterday for $280 complete with poles. I figured it's cheap insurance in case something happens to my current cover while the boat is sitting on the lake. My buddy ordered a "custom cover" and it took weeks and when he received the cover it didn't fit right and he had to send it back. Unfortunately this happened during a bunch of storms so he was not a happy camper. If my current cover lasts 4-5 years more I'll have a replacement that should last another 5-7. -
2013 V226 Surging
2ndtimearound replied to lakerat's topic in Supreme Boat Maintenance, Performance, Troubleshooting
I had the same thing happen on my Malibu. It would run but start popping and missing at around 2000 rpm. Chased everything and finally found the insulator cracks on 2 different Autolite plugs. Found out later it was a known issue for them to split or crack after a few seasons. -
2017 Eight.3 Ronix Wakesurf Shaper
2ndtimearound replied to Blair Goldade's topic in Supreme Boat Accessories, Electronics and Modifications
I've got a couple of them I can borrow. I tried one for an afternoon and we found the same thing. It takes the lip off and makes it hard to get air. I found that it does give a little wider play area and worked well for skimming. For surf style I like the boat heavily weighted/listed. I'll have to try it for Goofy riders. We typically don't have any goofies on board but we're messing around on both sides of the wake so it would be a quick change over if we can get enough wave to make it worth doing. More testing...- 17 replies
-
- wake
- wake shaper
-
(and 1 more)
Tagged with:
-
Need help keeping water out of my boat
2ndtimearound replied to prorider17's topic in Centurion Boats General Discussion
Stop gap fix...duct tape. -
Thanks for all the visuals. Decisions...decisions.
-
Thanks for the visual Nick. That's very helpful.
-
Speed based Volume Control
2ndtimearound replied to Skibumm's topic in Centurion Boat Accessories, Electronics and Modifications
Yeah. Just tried it in my truck and it works really well. I like that you can adjust the volume on both the low and high end and control the ramp up by the speed settings. -
Right. I have room for one layer of 45lb plates but there is a lot of wasted space with the indents of the plates and the space between them. They are round so the fat sac kinda fills in the gaps and indents but it would be nice to have a better solution with a little added weight.
-
Does anyone know the dimensions of the 50lb lead wake bags or the POP bags? I'm using some 45lb plates under the fat sacs but would like to have something a little more elegant that I can stuff into smaller areas. I'm assuming both the pop and LW bags are about 2-2.5" thick.
-
Speed based Volume Control
2ndtimearound replied to Skibumm's topic in Centurion Boat Accessories, Electronics and Modifications
Awesome. I'm going to try this over the weekend. -
Speed based Volume Control
2ndtimearound replied to Skibumm's topic in Centurion Boat Accessories, Electronics and Modifications
That's a good idea. I've never tried it but that would be very useful for me. I'm always having to mess with the volume. My truck has speed based volume control and it works well enough although I wish it had a little more volume range. -
Looking for a new surfboard, need some advise.
2ndtimearound replied to Gilly's topic in Watersports & Related Gear
Ok...so I'm 5'10" and 160lbs. My son is a little lighter but same height. We both like the nubstep 4'6". It's more surf style but it does let you spin around like a skimmer. I like how it handles. We ride it without the nubster fins so we can spin it easier. It has great drive running all 4 for surf style. Might be something to check out. -
Need help choosing a wakesurf board
2ndtimearound replied to Newman44's topic in Watersports & Related Gear
Listed 226 is the way to go so- fill surf side only and add a bunch of people for weight. You are going to want more weight. Even with the added weight I run its even better when we have a stuffed boatload of peeps and we get the monster wave going. -
Need help choosing a wakesurf board
2ndtimearound replied to Newman44's topic in Watersports & Related Gear
I don't have first hand experience with the S226 mine is the V226. But in order to get a great wave on the same hull, I run 1100lbs in the port side locker, 600lbs under the port pass seat and 100lb+ in bow along with the center and port hard tanks full. Run about 10-15% trim for port surfing. So I'm guessing your QF is 500lbs, PNP is 550, and center is ~350? I'm thinking adding another 5-600lbs port side will help that wave. Next QF starboard <20%, PNP SB =empty, center take full, trim 10-15. Fine tune with QS or not. You should see a much nicer surf wave. -
Need help choosing a wakesurf board
2ndtimearound replied to Newman44's topic in Watersports & Related Gear
What sized Voodoo do you have? They have a 61" Voodoo that I would think would be plenty behind a properly weighted V226. If you have the 4'5" or 4'10" Voodoo that is probably too small to start. If you want a cheap good beginner board you can try the $249 61" Liquid Force Slaysh Wakesurf Board at Wakemakers to get into a bigger size. -
I have the 25 Gallon gas caddy but since I have a super steep hill to go down to get to the dock I use the 5 gallon safety cans for a quick fill. I like that they empty quick and you control the flow via the handle. Easy to fill, quick to empty and never a spilled drop. When I need a lot of gas I end up hauling 5 or 6 regular 5G plastic cans and use the shaker hose.
-
Mission Delta Wake shaper
2ndtimearound replied to tsanfilippo's topic in Centurion Boat Accessories, Electronics and Modifications
I've still got the suckgate. Maybe I'll try to run it farther forward. I had it about 10" from the back. Due to the 2nd step curve on the hull I can only put it on the bottom edge. That may explain why it was much better heavily listed with the suck gate.- 111 replies
-
- Wake shaper
- Surf
-
(and 1 more)
Tagged with:
-
2015 s226 prop wash damage
2ndtimearound replied to zonk's topic in Supreme Boat Maintenance, Performance, Troubleshooting
Sounds like you are getting close to my stock prop, the Acme 537...13.5x16 I now run the 1433 and it's about 2800 rpm at 11.4mph. -
2016 Supreme S226 Surf Setup
2ndtimearound replied to Gilly's topic in Supreme Boats General Discussion
I think I'm the only one that likes the little stock 250lb or whatever it is filled full for counter weight. Basically same setup though, all stock ballast full. 1000lbs surf side locker, 600lbs under surf passenger, 100lbs in bow (sometimes more with peeps). Occasional suck gate for something different (loses lip and pushes white water toward non surf side (listed at the same time. suckgate is just OK weighted even on my 13 v226). -
Mission Delta Wake shaper
2ndtimearound replied to tsanfilippo's topic in Centurion Boat Accessories, Electronics and Modifications
Interesting the different experiences with the suck gate. We tried on out on our 226 last week. We weighted the boat evenly and tried the gate. It was OK but didn't create the huge wave just a cleaner larger face to play on. We decided to list it as normal and use the suck gate which was actually pretty good as it moves the wash over toward the opposite side and gives a nice big play area with good size. Both my son and I decided we could take it or leave it as it took away the lip to pop off on the top of the wake. Our friends have one on their 24' Wakesetter and it made the goofy side look great. Regular was OK, fun easy to ride but not huge. For them it works great as they have to switch sides a lot.- 111 replies
-
- 1
-
- Wake shaper
- Surf
-
(and 1 more)
Tagged with:
-
Tear in the bow seating
2ndtimearound replied to Avalentines238's topic in Supreme Boats General Discussion
Depending on the tear I've used super glue on a vinyl cuts. It' probably been 5 years now and they are still holding and still look good. I had light vinyl so you could see the cut line but it's held together. I butt welded the vinyl as it was like a sharp knife cut. If your's is jagged it may not help. -
Do you still have the 857 that you can mock up and measure?