CURT489
Crew-
Content count
14 -
Joined
-
Last visited
Community Reputation
0 NeutralAbout CURT489
-
Rank
Fresh Fish
- Birthday 10/19/1981
Contact Methods
-
ICQ
0
Profile Information
-
Gender
Male
-
Location
BATON ROUGE,LA
Previous Fields
-
Boat
Centurion Elite
-
Does anybody know how to get in touch with the service department at centurion? I have a broken windshield that i need to get fixed and centurion has to cross reference my hull id# for a windshield replacement. Please someone help.
-
WINDSHIELD REPLACEMENT? elite v drive
CURT489 replied to CURT489's topic in Centurion Boats General Discussion
What kinda of cost am i looking at? -
I was on the way to the river earlier today and a rock hit the windshield. Where do i find a replacement windshield for the port side of my boat. Lucky i had tint on the windshield or else it would have been all over the boat. My boat is a 2003 elite v drive. thanks
-
boat gauge?
CURT489 replied to CURT489's topic in Centurion Boat Maintenance, Performance, Troubleshooting
Thanks guys. i will try and find a gauge dealer. -
boat gauge?
CURT489 replied to CURT489's topic in Centurion Boat Maintenance, Performance, Troubleshooting
My boat is a 2003 would that still be under warranty? Also i am in south louisiana are there any dealers that can take care of this issue or do i need to call factory? Thanks. -
Has anyone had a problem with the rpm needle getting stuck and not working with the motor running. Also my volt meter stopped working as well. I tried tapping on the face plates to make the needle or something and nothing happened. I pulled the dash out to see if anything came loose behind the gauges it seems to be all intact. Put a volt meter on the battery and alternator and the output voltage is good just no reading at the gauge. Everything worked fine when i winterized the boat in the fall. These are combination gauges all in one. Gauge 1. is RPM,oil temp,water psi Gauge 2. is speed,voltage,fuel What else should i check for on these things?
-
I saw your boat on onlyinboards for sale. the green elite v drive. Would you be interested in selling those 350's? If not what do you think about twin 400's from fly high in the rear. Would that be to much in the rear?
-
Best Ballast Pump out there?
CURT489 replied to WakeDoc's topic in Centurion Boat Accessories, Electronics and Modifications
few pictures of pumps and boat -
Best Ballast Pump out there?
CURT489 replied to WakeDoc's topic in Centurion Boat Accessories, Electronics and Modifications
Model BW85P - Mini Vac Utility Pump with Pud-L-Scoop, 12 Volt Simer Pumps www.pumpagents.com $128 Prices range from $75-$130 reversible i used three of these pumps plumbed through a 11/2 brass thru-hull fitting out the bottom of the boat. I turn on all three at one time and 7-10mins later all the sacks are filled ~1000lbs. I used these pumps for two summers now with no problems. They move a little less water than the jabsco pumps, but these are a good alternative to jabsco pumps. if i can figure out how to reduce the size of the pictures i will post some. I posted another topic about weight for my hull in centurion boats general discussion. Any help would be great. -
2003 elite v drive. What configuration weight are people running on this hull. I am currently running a c shaped sack in the front250lbs-350lbs until the front seats start to pop up, and 2 250lb sacks in the rear lockers. Should i be putting more in the rear or midship?