Avalanche1

So I pulled my mid hard tanks and replaced them with Fly High side sacs. I was able to use all the factory plumbing and fittings. My question is about the hard tanks, there was some sort of sensor or sending unit on top of the tank, can anyone tell me what these did? Also, will the factory sprinkler setup still work without these sending units attached? I will eventually be pulling the sprinkler valves and adding two more pumps.

Yo Hendo, go see Rick as Canvas Vinyl Creations in Hague Road. His number is 317-371-4227. He made a custom cover for my boat that wraps all the way down three inches under the bottom of the boat. It fully covers the swim platform also and is trailerable, I will try to upload a picture of it. Wont see you on the lake anymore as I have moved to Clermont Florida. Talked about you with the guys over at Transitions Watersport yesterday, they sound like good peeps. Love living here, surfed last Friday night in short and a jacket, not cold at all. Another cool thing about being down here is all the pro riders. I met Parks Bonifay at the grocery story last week and Chad Sharpe at Tommys of Florida Back to the cover, it was not cheap but Rick does great work.

Yo crew members, I just moved to Clermont Florida from Indiana and wanted to see if there were any crew members in the area. I live 3 blocks from Lake Minneola. My boat will be here in about three weeks but until then I would love a pull! Thanks, Dan

Hey any Floridians out there that might be able to give me some advice. I have a possible job relocation to the Orlando area, no more Indiana winters, but am need some advice on good places to live and ride. I have been to Wakeboard Camp in Clermont so I know a lot goes down there. Any other suggestions?

I have 2011 Avalanche, two Rev 10's on a Gladiator tower that I store with the tower down every year. I leave the cover on and simply lay the tower back on one of those orange life vest. This keep the tower off the cover and off the small strip of fiberglass between the back seat and the sun pad. Never had any issues.

We had this happen to our lake a few years back and we merely walked the boat through the mud and yuck that is the bottom of the lake until we go it to deeper water. I personally wouldn't want to take the chance of pulling the junk into the cooling system of you engine.

Needing some help here, I have a '11 Avalanche with factory mid and center hard tanks, running off factory sprinkler manifold that are not filling. Here is the trouble shooting I have done so far: 1. Checked pump..running fine/imperller fine 2. Pulled hose leading to filter, while pump on...steady flow of water, 2. Unscrewed each of the spinkler valves, water flowed out as it should, 3. Ensure sprinkler valves are open 4. Took off filter, emptied and re-installed (checking for air-lock)....any suggestions on what next? I am thinking about pulling that filter off and running the hose directly into the sprinkler, would this help? Any suggestion would be greatly appreciated!

Get the lift and a full skirt on your cover. My last Avy I had a skirt put on my existing cover, worked great. My new boat I had a full custom cover made for it, including covering the swim platform, that is a must. It will fade like crazy. Not sure if I have any picts on my gallery of the full cover or not.

Paycheck, I upagraded my membership, I have been meaning to do that for months just finally did, thanks for the push!

So I ran into Hendo on the lake yesterday, he has Drew D 2012 244..it is sick, and I got to see his wetsounds set up. Here is what I want to start with 2 Rev 10 gladiator mount , Syn 4 and the 420 eq. I know there are some WS dealers on here... Who wants to give me the best price? We can pm each other and I won't share prices, I know you guys have to make your money. Or can any crew members recommend a good dealer, someone you have had a good experience with I am in central Indiana and would really just need the product, I can get the install with some people I know

Troy, if you find a 2013 G25 for $115k let me know, I could make $50k on that thing in a heart beat. You cant even touch a new G23 for that. The reason I know this is Centurion does not have a dealer in my area so the only PCM guys to work on my boat is the local Nautique dealer. Nice boats, dont get me wrong but I will stick with Centurion.

The wake looks great but the price tag of the G series is crazy. I recently saw a 2013 G25 priced at $181k...what the....

Does anyone know if Hendo is still selling his 08 Avy. Pretty sure this would be a get in and go boat, not much needed if anything.

I would be interested in this plate for my Avy also...come on Centurion listen to your people!

So which ones did you buy?