Search the Community
Showing results for tags 'screen'.
Found 5 results
-
2017 S211 Screen at 0% brightness from 100%
Marshall posted a topic in Supreme Boat Maintenance, Performance, Troubleshooting
I was out on my boat adjusting some settings and bumped the screen brightness. It went from 100% to 0% with a bump. Now I can't see anything to increase the brightness and get back to that screen. Any advice? Thanks. -
Hello I’m trying to reach CDIFRANCO but his box seems full. I’m actually looking to buy a defective screen for parts. Tks
-
2014 sv 244 issues need help
migwrx posted a topic in Centurion Boat Maintenance, Performance, Troubleshooting
So I bought my 2014 sv 244 new nov 2015. In the spring of 2016 we finally got to go do the water test with the dealer, right away I noticed that when powering up the boat the bow bag started filling up and the ramfill said "increase speed to fill". Knowing that that wasn't right I advised the dealer and centurion sent them the software update. So my boat is that the dealer waiting for the screen update, they get the USB from centurion and still it wants to fill right away without pressing on the screen. So I still don't have my boat, they decide that they will change my screen out completely. Once that happened the boat ran fine. This spring (29 May 2017) I take the boat out for the first time this year and I noticed that when we are surfing sometimes the cats orange positional triangle disappears and that the green cats line stays all the way left. I contact the dealership then and don't here back from them. Aug 6 I take my boat out again but this time the ramfill does' work the boat fills up alone at the dock. So I enter the trailer mode and press open, close a few times then drive forward the let the boat think it's filling then I drained them. Then I could fill properly. So go boating and the screen is still acting up. I take the boat out and contact my dealer on the 7th I bring it in and they contact centurion about the valves at the same time we notice that my rudder is not inline anymore so they look and they say it's the keyway that fell out so they fix it. A week later they get the parts to swap out the drain master valves for the new valterra but they never got instructions and there was parts missing. So I contact centurion to make them aware they then remember that in 2014 the software update can't be downloaded of a link so they send a USB to my dealer. That USB never makes it there. So I the 23rd they send another on rush. It gets there on the 25th. So it took 18 days for me to get my valves replaced. I took the boat out yesterday valves work great the boat turned great for about 2hrs before it started rattling again. I still have the issue with the cats. And how it's also happening in neutral. Not sure what to do next my boat is always in the shop, I don't think it's fair the pay that much for a boat and its problem after problem. And my rudder is out of line again. -
Changing preset riders
byerman posted a topic in Centurion Boat Accessories, Electronics and Modifications
Every time my system boots up, it pre-selects rider "none". In this mode, Cats is neutral, the tab is up, there is no ballast, and there is not preset speed. Once I input a rider, how do I get "none", where every thing is neutral back? -
Sea Strainer To Catch Milfoil In Cooling System
Donnieb posted a topic in Centurion Boats General Discussion
I have my 2010 Centurion Enzo SV240 moored on a lake that tends to get a lot of milfoil during the July/August time period, wreaking havoc with the water intake and cooling system/impeller. I'm considering installing a sea strainer after the shut-off valve on my water intake, catching the milfoil culprits. This is the system I'm planning to put inline: www.bakesonline.com/detail.aspx?ID=1076 Have other people done this? What are the pros/cons? Thanks. Don- 3 replies
-
- overheating
- sea strainer
-
(and 3 more)
Tagged with: