Search the Community
Showing results for tags 'ballast pump'.
Found 5 results
-
I am looking at doing an upgrade on the pumps on my 2007 Centurion Avalanche C4. I have 750s in the rear lockers, and the factory center ballast. Plus a loose v bag in the front. Looking at the kit from Wake Makers, but it's not cheap. Wondering if i am better of going with two pumps for the rear lockers, and leaving the factory one for the center built in ballast. Or better off just replacing all three. The kit with 3 pumps is about $2,000 plus installation
-
Ballast pump won't run
N8 Froelich posted a topic in Centurion Boat Maintenance, Performance, Troubleshooting
Brand new here. Just brought our new "used" 2011 Enzo 240+ home two days ago. I have a lot to learn about this boat. Been boating all my life but this is a different animal . The main ballast pump won't run. I inspected the impeller and it was in backwards from what I believe is correct. But that is a minor issue. It doesn't seem to energize or run. Question is, how do I find a wiring schematic on this, is there circuit protection other than the main panel under the dash. Something obvious I'm missing like a switch that needs to be on aside from the battery? Tried with the engine running too, and no luck. Thanks guys. -
Ballast not filling
danironman posted a topic in Centurion Boat Maintenance, Performance, Troubleshooting
Just purchased a '06 C4 storm series. The original owner had the ballast pump replaced but now the tanks won't fill. You can hear the pumps running both in and out but no water intake. The shop said they were working when the boat left the shop. I can take it back in under the warranty work but was wondering if anybody has experienced this to see if it's something simple that I might be able to fix myself and save the hassle and time of taking it in. Thank You -
(Last one I promise :] ) Ballast Pump Relay
Praesto posted a topic in Centurion Boat Maintenance, Performance, Troubleshooting
Last year when I had my boat winterized I was told the ballast pump relay is "not working". I believe this to be true because one of my tanks does not fill when turned on. The other two properly fill and empty. I am wondering if there is an easy way to fix this / what it means. The reason I am blowing up the forums with these posts is cause the family wants to take the boat out next weekend for a family outing. I want to have the boat fully ready and complete by then. These are my last things that need to be handled. Thanks again crew!
