Search the Community
Showing results for tags 'Gauge'.
Found 8 results
-
Pro-Vision Blue Screen?
Donnieb posted a topic in Centurion Boat Maintenance, Performance, Troubleshooting
I need some help with my Pro-Vision screen. I tried to start my boat up yesterday, but instead of immediately turning over, the engine was silent and I heard a loud beep from the boat. I turned the battery by-pass switch on and then back off, and then it started up, but my Pro-Vision wouldn’t come into focus – it was just a blue screen. I spent a while tinkering around and reading the Crew help forums, taking the Provision unit out of the dash and ensuring all of the connections were seated properly. But still no luck beyond the blue screen. I could start up the boat, drive it, but I couldn’t see the speedometer, speed control, etc. Just a blue screen. I turned the battery by-pass switch on and then off quickly, and all of a sudden the ProVision came back on – and I was able to operate the boat with the Provision screen and all of the controls! So I drove around a bit, and then turned the engine off and back on and the ProVision was still working. But then a little bit later I tried to start the boat again and the provision was blue-screening. I played with the battery by-pass switch and it came back on. Any idea what’s going on? I have a 2010 Enzo 240SV with two batteries. Thanks. Don -
1997 sport bow rider gauge panel/dash
ChanceHill posted a topic in Centurion Boat Maintenance, Performance, Troubleshooting
I’m looking for a 97 sport bow rider dash panel or gauge panel not sure exactly what it’s called but I can’t seem to find one on the internet anywhere. One of the gauge holes is busted and won’t hold the gauge id like to get it back in original condition if possible. Anyone know where I could start to look for one? -
Fuel gauge not working
tramero posted a topic in Centurion Boat Maintenance, Performance, Troubleshooting
Fuel gaugesays tank is full. Second season with boat and I have always just ignored it and filled her up every few hours Could this be and easy fix ? -
gauge cluster and provision dead?
Randy4life posted a topic in Centurion Boat Maintenance, Performance, Troubleshooting
Hey guys took the boat out yesterday and everything works great but the gauges and the pro vision screen in the dash... all the rocker switches worked and the engine starts fine? I recently had the boat at the dealer because they forgot to put the engine plugs back in when the winterized it, is it something else they might have missed? I also had the main battery switch rewired this season so it could be one of the 2 things as it was all working great last year......... HELP LOL -
I just before I put my boat in the water the first time this weekend my fuel gauge was pegged out pass the full mark and when I turn the key on it move to full mark. I check the wire hook up at the gas tank and all looks good. BUT still goes to pass the full mark every time I shut the key off. I think it could be in the sending unit but not sure, has any one have had this problem before and if so what did you do?
-
Speedo and Alignment Problem
dubbwelsh posted a topic in Centurion Boat Maintenance, Performance, Troubleshooting
Took my new-to-me 05 Centurion Elite C4 on its maiden voyage today. Everything all good except I have no speedo and the steeringwheel (rudder) seems to be 90 deg off to the port side (pulls starboard when positioned straight). I guess my question is, what are some things or logical steps to troubleshoot speedo now that its in my driveway AND can a guy align the rudder and wheel pretty easily? I'm no stranger to the wrenches, just looking for some "check this first" advice before I get to tearing into it, I'd like to get back on the lake fully working ASAP! Thanks in advance! (originally posted in general, but realized post belonged here) -
Speedo and Alignment Problems, 05 Elite C4
dubbwelsh posted a topic in Centurion Boats General Discussion
Took my new-to-me 05 Centurion Elite C4 on its maiden voyage today. Everything all good except I have no speedo and the steeringwheel (rudder) seems to be 90 deg off to the port side (pulls starboard when positioned straight). I guess my question is, what are some things or logical steps to troubleshoot speedo now that its in my driveway AND can a guy align the rudder and wheel pretty easily? I'm no stranger to the wrenches, just looking for some "check this first" advice before I get to tearing into it, I'd like to get back on the lake fully working ASAP! Thanks in advance! -
Adjust voltage gauge
Rob-be-me posted a topic in Centurion Boat Accessories, Electronics and Modifications
I have a 2006 Avalance. The voltage gauge is way off. I test the battery at 12.52V, the instrament gauge shows closer to 10.25V. I need to adjust the gauge so I can monitor the voltage while chill'n on the lake to the stereo. Any suggestions on adjusting the instrament voltage gauge?
