Search the Community
Showing results for tags 'ENZO230'.
Found 3 results
-
WAKESURF PLATE MOD 2011ENZO230
Chrisj4207 posted a topic in Centurion Boat Accessories, Electronics and Modifications
I DIDNT KNOW IF THIS MOD WOULD WORK ,FEW HOURS OF TIME,LESS THAN 40$IN PARTS,THE WELDING WAS FREE THANKS KEN"FATHER IN LAW" STOLE THE SPECS OFF THE FX-22 PLATE. THE PLATE ON THE ENZO 230 ISNT 13"LONG ITS AROUND 12"BECAUSE OF THE BENDS THAT WERE MADE ON THE PLATE. WITH THE PLATE UP IT DELIVERS A LONG CURLING WAVE LITTLE RAMPY. WITH THE PLATE DOWN ITS AWESOME IM RUNNING IT AT 20%IT MAKES THE WAVE TALLER AND MORE RAMPY SUPER SICK, NIGHT AND DAY DIFFERENCE I WOULD RECOMMEND IF YOUR SERIUOS ABOUT SURFING. IM RUNNING ENZO SACS,FLOOD GATES AND BOW BALLAST, I DIDNT NEED TO FILL UP THE ENZO SACS ALL THE WAY I TAKE IT TO THE RIBBON ON THE BOAT, THE NEW VENT SCOOPS WORK GREAT BUT ANY MORE WEIGHT AND WATER WILL BOIL OVER IF YA KNOW WHAT I MEAN AND I ONLY HAD 3 PEOPLE IN THE BOAT. IM STILL GONNA RUN SOME MORE TEST. I GOT STAINLESS PLATES,THEY RAN AROUND 40$ FOR THE METAL, MADE THE TEST ONES OUTA STEEL THEY RUST OH WELL JUST A TEST. IM THINKING ABOUT EXTENDING THE PLATE TO 8.5"INSTEAD OF 6.5 LIKE ON THE FX-22. SO FAR SO GOOD I LIKE WHAT IM SEEING. I WISH CENTURION WOULD JUST MAKE A BOLT ON APP IT REALLY MAKES A DIFFERENCE USED A PIECE OF SHEET METAL FOR TEMPLATEHAD FATHER IN LAW WELD UP SOME PLATES SAME THICKNESS AS STOCK PLATE1/8"THICK DRILLED 3 HOLES EACH SIDE USED 3/4"BOLTS WITH LOCK NUT LOOKING GOOD SMOOTHFIRST TEST ITS FINALLY CURLING AND CLEANCLOSE UP OLD WAVE LAST YEAR SUPER CHOPPY LOTS OF WHITE WATER ALL OVER THE TOP THANKS ALL- 88 replies
-
- 1
-
2011Enzo 230 prewired for extra sacs
Chrisj4207 posted a topic in Centurion Boat Maintenance, Performance, Troubleshooting
Does anybody know about the prewire for the center sac?? Ive found 1 plug bye the rear port that reads center valve ,yellow and black, and the same connector that's used for the pump connections and I've checked behind the toggle switches and found the same wire attached to a black box that all the other toggles are hooked to, just hanging there ready to put a toggle on. Is there another center valve wire that I can't find for the center sac?? I assume it's fill and drain but I can only find one. There's 2 yellow and black wires going into the black toggle box that's hanging Please help trying to avoid adding more wire if I don't have to Thanks -
Need help center ballast wiring2011enzo230
Chrisj4207 posted a topic in Centurion Boats General Discussion
Does anybody know about the prewire for the center sac?? Ive found 1 plug bye the rear port that reads center valve ,yellow and black, and the same connector that's used for the pump connections and I've checked behind the toggle switches and found the same wire attached to a black box that all the other toggles are hooked to, just hanging there ready to put a toggle on. Is there another center valve wire that I can't find for the center sac?? I assume it's fill and drain but I can only find one. There's 2 yellow and black wires going into the black toggle box that's hanging Please help trying to avoid adding more wire if I don't have to Thanks