Heaters by: Heater Craft
Installation and Owners Manual
For the following HEATER model numbers: 100H, 200H, 300H, 400H, 500H, 700H and 900H Series Hydronic Heaters
Approximate Installation Time: 3-5 Hours
Tools Required:
- #2 Phillips Screw Driver
- Power Drill
- 7/64" Drill Bit
- 1 inch-4 inch" Hole Saw
- Jig Saw
- Hose Cutter
- Wire Crimper
- Teflon Plumbers Tape
- Marine Sealant
- Pencil
5 products
-
Marine Heater - 200 Pro - All Inclusive System [ 2-Outlet ]
(0 reviews)Product Description:
New for the 2014 Season - The all new two vent heating system - 4yr/48mo Warranty. Smaller, lighter and faster. The team at Heater Craft has done it again. They have redesigned their industry leading marine heater and increased air flow by 8%, made it 3% lighter and 5% smaller. The 28,000 BTU/hr, two vent heater is easily vented to bow or rear seating areas while the second can be ducted to the drivers seat. Heater Craft heaters are perfect for a late night boat ride, warming up after a swim or simply extending your season on the water. When it comes to heaters no one does it better.
With purchase of a new heating system, Heater Craft backs the product with their new 4/48 limited warranty - 4 years, 48 months.
The 200 Pro is a two outlet complete heater system:
Which includes everything needed for a professional heater installation including a Hot Tube™ and a fixed Louver, heater hose (50 ft), clamps, hardware, vents, switch, and installation instructions (see below for detailed list).
Designed Use:
Wake & Ski Boats, V-Drives, 19' to 24' Boats with I/O engine.
Heater Craft heaters have been the standard of excellence for nearly 25 years for great boat brands including Centurion and numerous other brands.
Technical Specifications:- 28,000 BTU Heater with all new 45 degree face
- 8% faster due to the new 45 degree face without increasing AMP Draw or motor size
- Takes up 5% less space allowing more versatility during installation
- 3% Lighter than previous models
- Amperage: Low 4.4, Med 5.8, High 8.5
- Max. Est. BTU/h: 28,000[/size]
- Air Flow: Low 230 cfm, Med 228 cfm, High 263 cfm.
- Hose barb: 5/8" or 3/4"
Included in the 200 Pro System- One(1) 28,000 BTU Heater 45 Degree Wrapper with Wire harness
- Universal Mounting Brackets & Screws
- Heavy Duty Wire Ties
- One(1) High Low Switch with Indicator Assembly
- Six(6) Stainless Steel Hose Clamps
- Two(2) 6' Sixteen Gauge Wire
- One(1) Fixed Louver & One(1) Hot Tube™ with One(1) Chrome Ring
- 50 Feet of Heater Hose
- One(1)Low Idle "Y"
- Brass Fittings
- Detailed Installation Manual
Dimensions:
9.4in. W x 6.4in. H x 8.6in. D
Weight:
20 lbs.
NOTE: Leeway on this item could be two weeks$499.99 Out of Stock
Out of Stock -
Marine Heater - 230 Pro - All Inclusive System [ 3-Outlet ]
(0 reviews)Product Description:
New for the 2014 Season - The all new two vent heating system - 4yr/48mo Warranty. Smaller, lighter and faster. The team at Heater Craft has done it again. They have redesigned their industry leading marine heater and increased air flow by 8%, made it 3% lighter and 5% smaller. The 28,000 BTU/hr, three vent heater is easily vented to bow or rear seating areas while the third can be ducted to the drivers seat. Heater Craft heaters are perfect for a late night boat ride, warming up after a swim or simply extending your season on the water. When it comes to heaters no one does it better.
With purchase of a new heating system, Heater Craft backs the product with their new 4/48 limited warranty - 4 years, 48 months.
The 230 Pro is a two outlet complete heater system:
Which includes everything needed for a professional heater installation including a Hot Tube™ and a fixed Louver, heater hose (50 ft), clamps, hardware, vents, switch, and installation instructions (see below for detailed list).
Designed Use:
Wake & Ski Boats, V-Drives, 19' to 24' Boats with I/O engine.
Heater Craft heaters have been the standard of excellence for nearly 25 years for great boat brands including Centurion and numerous other brands.
Technical Specifications:- 28,000 BTU Heater with all new 45 degree face
- 8% faster due to the new 45 degree face without increasing AMP Draw or motor size
- Takes up 5% less space allowing more versatility during installation
- 3% Lighter than previous models
- Amperage: Low 4.4, Med 5.8, High 8.5
- Max. Est. BTU/h: 28,000[/size]
- Air Flow: Low 230 cfm, Med 228 cfm, High 263 cfm.
- Hose barb: 5/8" or 3/4"
Included in the 230 Pro System- One (1) 28,000 BTU Heater 45 Degree Wrapper with Wire harness
- Universal Mounting Brackets & Screws
- Heavy Duty Wire Ties
- One (1) High Low Switch with Indicator Assembly
- Six (6) Stainless Steel Hose Clamps
- Two (2) 6' Sixteen Gauge Wire
- One (1) 2in. Fixed Louver & Two (2) Hot Tubes™ with Two (2) Chrome Rings
- 50 Feet of Heater Hose
- One (1) Low Idle "Y"
- Brass Fittings
- Detailed Installation Manual
Dimensions:
9.4in. W x 6.4in. H x 8.6in. D
Weight:
20 lbs.
NOTE: Leeway on this item could be two weeks$539.99 Out of Stock
Out of Stock -
Marine Heater - 300 Pro - All Inclusive System [ 3-Outlet ]
(0 reviews)Product Description:
New for the 2014 Season - The all new three vent heating system - 4yr./48mo. Warranty. Smaller, lighter and faster the team at Heater Craft has done it again. We have redesigned our industry leading marine heater and increased air flow by 8%, made it 3% lighter, and 5% smaller. The 40,000 BTU/hr three vent heater is easily vented to bow and rear seating areas while the third can be ducted to the drivers seat. Heater Craft heaters are perfect for a late night boat ride, warming up after a swim or simply extending your season on the water. When it comes to heaters no one does it better.
With purchase of a new heating system, Heater Craft backs the product with their new 4/48 limited warranty - 4 years, 48 months.
The NEW 300 Pro is a complete heater system:
Which includes everything needed for a professional heater installation including heater hose, clamps, hardware, vents, switch, and installation instructions (see below for detailed list).
Designed Use:
Wake & Ski Boats, V-Drives, 22' to 30' Boats with I/O engines. Any marine applications with an inboard engine including houseboats, cruisers, yachts, and work boats.
Heater Craft heaters have been the standard of excellence for nearly 25 years for great boat brands including Centurion and numerous other brands.
Technical Specifications:- 40,000 BTU Heater with all new 45 degree face
- 8% faster due to the new 45 degree face without increasing AMP Draw or motor size
- Takes up 5% less space allowing more versatility during installation
- 3% Lighter than previous models
- Amperage: Low 4.4, Med 5.8, High 8.5
- Max. Est. BTU/h: 40,000
- Air Flow: Low 230 cfm, Med 228 cfm, High 263 cfm.
- Hose barb: 5/8" or 3/4"
Included in the 300 Pro System:- One (1) 40,000 BTU Heater 45 Degree Wrapper with Wire harness
- Universal Mounting Brackets & Screws
- Heavy Duty Wire Ties
- One (1) High Low Switch with Indicator Assembly
- Six (6) Stainless Steel Hose Clamps
- Two (2) 6' Sixteen gauge wire
- Two (2) Hot Tubes™ & One (1) Fixed Louver with Two (1) Chrome Ring
- 50 Feet of Heater Hose
- One (1) Low Idle "Y"
- Brass Fittings
- Detailed Installation Manual
Dimensions:
16in. W x 6.5in. H x 9.5in. D
Weight:
22 lbs.
Leeway on this item could be two weeks$649.99 Out of Stock
Out of Stock -
Marine Heater - 340 Pro - All Inclusive System [ 4-Outlet ]
(0 reviews)Product Description:
New for the 2014 Season - The all new four vent heating system - 4yr./48mo. Warranty. Smaller, lighter and faster the team at Heater Craft has done it again. We have redesigned our industry leading marine heater and increased air flow by 8%, made it 3% lighter, and 5% smaller. The 40,000 BTU/hr four vent heater is easily vented to bow and rear seating areas while the third can be ducted to the drivers seat. Heater Craft heaters are perfect for a late night boat ride, warming up after a swim or simply extending your season on the water. When it comes to heaters no one does it better.
With purchase of a new heating system, Heater Craft backs the product with their new 4/48 limited warranty - 4 years, 48 months.
The NEW 340 Pro is a complete heater system:
Which includes everything needed for a professional heater installation including heater hose, clamps, hardware, vents, switch, and installation instructions (see below for detailed list).
Designed Use:
Wake & Ski Boats, V-Drives, 22' to 30' Boats with I/O engines. Any marine applications with an inboard engine including houseboats, cruisers, yachts, and work boats.
Heater Craft heaters have been the standard of excellence for nearly 25 years for great boat brands including Centurion and numerous other brands.
Technical Specifications:- 40,000 BTU Heater with all new 45 degree face
- 8% faster due to the new 45 degree face without increasing AMP Draw or motor size
- Takes up 5% less space allowing more versatility during installation
- 3% Lighter than previous models
- Amperage: Low 4.4, Med 5.8, High 8.5
- Max. Est. BTU/h: 40,000
- Air Flow: Low 230 cfm, Med 228 cfm, High 263 cfm.
- Hose barb: 5/8" or 3/4"
Included in the 340 Pro System:- One (1) 40,000 BTU Heater 45 Degree Wrapper with Wire harness
- Universal Mounting Brackets & Screws
- Heavy Duty Wire Ties
- One (1) High Low Switch with Indicator Assembly
- Six (6) Stainless Steel Hose Clamps
- Two (2) 6' Sixteen gauge wire
- Two (2) Hot Tubes™ & Two (2) Fixed Louver with Two (2) Chrome Rings
- 50 Feet of Heater Hose
- One (1) Low Idle "Y"
- Brass Fittings
- Detailed Installation Manual
Dimensions:
16in. W x 6.5in. H x 9.5in. D
Weight:
22 lbs.
Leeway on this item could be two weeks$679.99 Out of Stock
Out of Stock -
Marine Heater - 360 Pro - All Inclusive System [ 6-Outlet ]
(0 reviews)Product Description:
New for the 2014 Season - The all new four vent heating system - 4yr./48mo. Warranty. Smaller, lighter and faster the team at Heater Craft has done it again. We have redesigned our industry leading marine heater and increased air flow by 8%, made it 3% lighter, and 5% smaller. The 40,000 BTU/hr four vent heater is easily vented to the bow, stern, driver and rear seating areas while the sixth can be ducted to the windsheild and used as a defogger. Heater Craft heaters are perfect for a late night boat ride, warming up after a swim or simply extending your season on the water. When it comes to heaters no one does it better.
With purchase of a new heating system, Heater Craft backs the product with their new 4/48 limited warranty - 4 years, 48 months.
The NEW 340 Pro is a complete heater system:
Which includes everything needed for a professional heater installation including heater hose, clamps, hardware, vents, switch, and installation instructions (see below for detailed list).
Designed Use:
Wake & Ski Boats, V-Drives, 22' to 30' Boats with I/O engines. Any marine applications with an inboard engine including houseboats, cruisers, yachts, and work boats.
Heater Craft heaters have been the standard of excellence for nearly 25 years for great boat brands including Centurion and numerous other brands.
Technical Specifications:- 40,000 BTU Heater with all new 45 degree face
- 8% faster due to the new 45 degree face without increasing AMP Draw or motor size
- Takes up 5% less space allowing more versatility during installation
- 3% Lighter than previous models
- Amperage: Low 4.4, Med 5.8, High 8.5
- Max. Est. BTU/h: 40,000
- Air Flow: Low 230 cfm, Med 228 cfm, High 263 cfm.
- Hose barb: 5/8" or 3/4"
Included in the 340 Pro System:- One (1) 40,000 BTU Heater 45 Degree Wrapper with Wire harness
- Universal Mounting Brackets & Screws
- Heavy Duty Wire Ties
- One (1) High Low Switch with Indicator Assembly
- Six (6) Stainless Steel Hose Clamps
- Two (2) 6' Sixteen gauge wire
- Two (2) Hot Tubes™ & Four (4) 2in. Fixed Louver with Two (2) Chrome Rings
- 50 Feet of Heater Hose
- One (1) Low Idle "Y"
- Brass Fittings
- Detailed Installation Manual
Dimensions:
16in. W x 6.5in. H x 9.5in. D
Weight:
22 lbs.
Leeway on this item could be two weeks$739.99 Out of Stock
Out of Stock