FlyHigh Accessories
4 products
-
W709 - Tsunami Pump
(0 reviews)[1200 GPH/Gallons Per Hour]
The Tsunami Pump Assembly is designed to fill and empty sacs at an alarming rate. The tubing that is used is larger in diameter so it doesn't choke the pump, resulting in greater output. Combine that with the ProX Series Quick Connect System and you will be riding faster than ever before.
The Tsunami Pump is one of the fastest pumps that you put over the side of the boat and plug into a cigarette lighter accessory plug to manually fill and empty the fat sacs. It is made to quickly connect and disconnect to the ProX Series Fat Sacs which saves time. The clear hose on the Assembly allows you to clearly see when the water is flowing good. It also allows you to see if there are any air bubbles or obstructions that may be slowing the flow or being pumped into your fat sac.
How to Use a Tsunami Pump:
1. First put the Tsunami pump over the side of the boat under the water.
2. Then counter twist the end of the hose before sticking it in the quick connect with cap and chain on the top of the ProX Series Fat Sac so it twists back and holds itself in the groove.
3. Plug the Tsunami Pump into the cigarette lighter accessory plug.
NOTE: To empty do the same thing except the end of the hose goes over the side of the boat first and the pump goes on the quick connect with cap and chain on top of the ProX Series Fat Sac.
Free US Shipping
INTERNATIONAL Shipping
PM CrewAdmin -
W610-P - Jabsco Metal Ballast Puppy Pump
(0 reviews)The Jabsco Wakeboard Ballast Puppy is designed to pump water into Wakeboard Liquid Ballast Tanks and when reversed will also pump water out of them. It has a flow rate of 540 gallons per hour, so it can fill most ballast tanks in about five minutes. It is equipped with a Run-Dry Protection Device to automatically shut-off the pump and protect the impeller from run-dry damage should the pump be mistakenly left on after the Ballast Tank is empty. The Ballast Puppy also features ignition protection which allows the use of this pump in the engine compartment unlike its less expensive cousin the Simer Pump. This is the same pump used to fill and drain OEM ballast systems in Mastercraft Wakeboard Boats, 2009 Supra Wakeboard Boats, 2009 Moomba Wakeboard Boats, Correct Craft Wakeboard boats and Centurion Wakeboard Boats.
Free US Shipping
INTERNATIONAL Shipping
PM CrewAdmin -
558031 - 1 in. Black Hose
(0 reviews)This is the same 1" hose used for factory wakeboard ballast systems in Mastercraft, Correct Craft, Supra, Moomba and nearly every other manufacturer that uses 1" hose. The solid black design creates a clean install that looks like it came from the factory, because in a lot of boats, it did.
This hose is constructed with thick vinyl walls for excellent resilence, resistance to collapse and durability when exposed to bilge fluids and high temperatures. An internal helix reinforcement prevents kinking during tight bends for more installation options without limiting flow.
This easy to work with 1 inch hose installs easily, will last forever, and whether you're using Jabsco's Ballast Puppy Pump, this is the hose you want to use to maximize the speed of your system so you'll be on the water sooner. Get everything you need to install your ballast system from one place so you waste less time driving around town looking for parts.
Each quanitly selected is 1 ft. long
Free US Shipping
INTERNATIONAL Shipping
PM CrewAdmin -
558031-316 SS HOSE CLAMP
(0 reviews)Trust these clamps for secure hose connections. All components are Type 316 stainless steel for ultimate corrosion resistance. The smooth, unperforated band surface and rolled edges prevent hose damage. Band and screw threads are properly pitched, rendering the clamp virtually immune to vibration-caused back-off.
Free US Shipping
INTERNATIONAL Shipping
PM CrewAdmin