Jump to content

kelly wells

Crew
  • Content count

    6
  • Joined

  • Last visited

Community Reputation

0 Neutral

About kelly wells

  • Rank
    Newbie

Profile Information

  • Gender
    Male

Previous Fields

  • Boat
    Centurion Enzo SV230
  1. Thanks a lot Hein I will start from there when I get the time (working 12 hour night shift currently). Do you ever do any boating on the Columbia? I'm about 7 miles from Crescent bar. i'll report back after checking those locations. I was considering rewiring all of the wiring to the pump using something similar to this.... https://www.wakemakers.com/wakemakers-plug-and-wake-16-complete-wiring-harness.html
  2. i appreciate the response and i will probably be taking the sprinkler valves out eventually although i believe i have more of a wiring issue at this point because my ballast switches are affecting my power to my other gauges including but not limited to the perfect pass, speedo, rpms... ONE switch in general will briefly turn power off to other component which leads me to believe its something to do with the wiring harness. I could be wrong, i will continue to research and pick away at this but any guidance is greatly appreciated Hein i like the work you have done to your boat it looks like you really have that wake dialed in! im going from a 2000 21ft centurion elite v. Big step up for me!
  3. July pic video thread

    just picked up a 2007 enzo, excited for next season! Currently it has some wiring gremlins with the ballast and blower electrical. Located in Quincy, wa. Most of my boating is done on the columbia.
  4. Eastern. Quincy. willing to travel.
  5. Hey everyone, FIRST POST so take it easy on me....I Recently purchased an 07 enzo sv230 and it has issues with the ballast system working intermittently. I was told its a common issue and there is some sort of valving system off the two pumps to give you the option of filling the four ballast tanks individually. Also the blower is working intermittently, although the switch and blower have been replaced. The mechanic who sold me the boat under consignment said the previous owner would not give him enough time to dig deep enough to find the underlying issuse ALTHOUGH he said it looked like the wiring had been messed with by the previous owner. I did notice that when i turn on the second ballast fill switch up from the bottom that all of my gauges turn off then back on, this clearly is not right and i need someone to diagnose exactly where the source of the problem is.
  6. Hey everyone, FIRST POST so take it easy on me....I Recently purchased an 07 enzo sv230 and it has issues with the ballast system working intermittently. I was told its a common issue and there is some sort of valving system off the two pumps to give you the option of filling the four ballast tanks individually. Also the blower is working intermittently, although the switch and blower have been replaced. The mechanic who sold me the boat under consignment said the previous owner would not give him enough time to dig deep enough to find the underlying issuse ALTHOUGH he said it looked like the wiring had been messed with by the previous owner. I did notice that when i turn on the second ballast fill switch up from the bottom that all of my gauges turn off then back on, this clearly is not right and i need someone to diagnose exactly where the source of the problem is.
×

Important Information

By using this site, you agree to our Terms of Use.