P10-WRC

What's up yall? After about two months of back and forth getting my template perfect, I finally got my finished product from Seadek installed. It came out better than I could have hoped. I did the install myself and it was rather simple. Cost was $950. It was a bit higher because of the two templates they had to send out and the Centurion logo was extra as well.

Is your motor required to have 91 octane? if not, you might actually be hurting performance as that fuel burns cooler and less efficiently than 87 or 89. The only reason to up it to 91 would be if you advanced the timing on the motor

yeah I noticed that too after watching the video. I will def get more neutral next time out

Here is a video of my first time ever surfing behind my boat. I am normally the pilot so I don't get to enjoy the water as much. I finally took my buddy out and had him drive for me. I am still figuring out good settings for the wake but am pleased so far. This was with 1100 pound port, 500 starboard and center full using a wake shaper. It was fun and I am hooked now.

my first time up on a surf board. I know i need a lot of work. Just stoked to be able to finally surf (i am normally the pilot)

does that bow bag go under the seats or on top?

racks look good but just wondering how you are going to reach them being that high up and that much bimini. Are you going to have to stand on the gunwales?

So the boat currently has two 750 pound fat sacs and I use a wake shaper for surfing. I pulled the trigger on some 1100 pound bags but am worried that is going to be too much ballast. I have the stock center ballast and nothing in the bow besides passengers and I don't list the boat I am concerned with not being able to get on plane and possibly being too low and swamping the boat over the stern when i stop to pick up a down rider. Thoughts?

Thanks Man, Yeah I added the support kit for the dividers. I will be taking the boat out next weekend to test out the new setup. My prop is a custom pitched prop already so I should be good to go there.

it's 1 foot longer in the main area. the bow is the same on both.

Sweet. Looks like I’m gonna step my game up. Is there a used market for 750 lb quick connect fat sacks?

I just measured my rear lockers and it's 20" wide in some spots. I don't think the 1100 pound bags will fit because they are 24" wide. Maybe if you made some type of platform to raise the bags though a few inches higher, the 1100 would fit. not sure how jankey that would be though

I have the same boat and year. The previous owner did exactly what you are suggesting. He removed the stock rear hard tanks and put in 750 lb fat sacks. I use a nauticurl wake shaper and it seems to be a decent surf wave. I might put the bigger bags in though for times i don't have as many passengers. Let me know if you need any pics of how it was all ran in my boat.

I've had 12 people on my 23' typhoon (max capacity according to my placard) and it was too many. 9 max to be comfortable unless there are some smaller children

Hello, I am looking to replace my fixed ski pylon with a pop up type on my 2007 Typhoon. I found a member with one on his Avy but centurion/fineline says they can't order parts for boats this old. I am hoping i can use a pylon from a newer boat and actually be able to order it from the dealer. Please post a pic of how your pop up pylon is mounted and also year/model of your boat. I have included a pic of the Avy mount that is identical to mine Thanks,.

Here are the pics he sent me. it mounts exactly like my fixed pylon does. All I gotta do now is find out if the current boats have the same mounting and i can finally order a pop up pylon.

were you able to get the part number or snap pics of the mounting?

i live in gilbert

hey man, is that a pop up ski pylon? any chance you can snap a pic of how it's attached to the boat? I have a fixed one on my Typhoon and tried calling fineline and the dealer to order a pop up one but they said it doesn't exist. Well it sure as hell looks like it exists on your boat. maybe a part number somewhere on it?

What's up everyone? I am looking to buy a wet sounds ws-420 equalizer and wanted to know where you all mounted yours at? I don't really see any spots on the dash that would work. I could mount under the dash but am worried about bashing my knee on it.

Hello, I was looking at my fuse block and noticed i had two power port fuses. one is labeled PT1 and goes to the cigarette port by the throttle on the dash. i want to add another port on the boat for people to charge their phones. I do not have a secondary port even though i have the fuse. Does anyone know where they ran this wire to from the factory?

yeah i have no port back there at all. very strange

I just replaced mine in my 07 Typhoon which is pretty much the same boat. The bracket that holds it in towards the rear will stay connected but you will need to unbolt the big nut that attaches the cable to that bracket. I also had to disconnect my impeller hoses because they were in the way of this. Took me a couple of hours as it was my first time. Not hard at all though. I had to remove the center hatch as well to get to the cable and fish it out. I did get some scratches from the fiberglass while fishing it through though. maybe wear long sleeves and gloves to avoid this

I love everything about my 2007 typhoon with the exception of the damn ski pylon. I've already smashed my toe on it once and my passengers have hit their elbows on it. I looked at the unit itself and i don't see a way to modify it. I was wondering if I could replace the entire unit with one out of another boat? Did centurion ever offer that as an option for a boat in that era?

I love everything about my 2007 typhoon with the exception of the damn ski pylon. I've already smashed my toe on it once and my passengers have hit their elbows on it. I looked at the unit itself and i don't see a way to modify it. I was wondering if I could replace the entire unit with one out of another boat? Did centurion ever offer that as an option for a boat in that era?