Friggy

I Pm'd him march 2 and have not heard anything back, but I'm interested as well for sure.

Vernon area is nice. A little more laid back than Kelowna. I think a better bank for your buck. you have Kalamalka lake which is beautifull as well as Okanagan lake. Between Kelowna and Vernon is Winfield or they call it Lake Country now. it is nice as well. Kelowna /West Kelowna is getting very big and busy, if that is what you need. We like Osoyoos in the summer for camping. The lake is smaller and shallow so the lake is very warm, somedays almost too warm. It is a small town but super busy in the summer and very quiet in the winter. hopefully that helps.

Ok I sent you the Centurion Operator's manual and also a ProVision II operator's manual. hope this helps Best regards Mal

try goggle Valtera # E40A-8, etrailer.com , looks like the valves you are looking for. I have the identical boat and are seriously thinking about making the swap.

I have a Operators manual in PDF form that I could try and e mail to you. it is about 10MB.

my new ride this year, Enzo SV240+ Osoyoos, BC

I have new to me 2011 Sv240+. Put it in the water last night for the first time for a spin to see how everything works. Tried filling the port side mid bag. Pump thru the sprinkler valve set up. Pump ran for a bout 4 minutes partially filling the bag. Pump stopped. after that nothing, tried to empty the bag nothing. tried re-filling the bag, nothing. tried filling and empting center tank, still nothing, tried the same for the Starboard bag , nothing. like the whole system shut down. is there a fuse for the whole system ? could not find anything. any help please from the Crew would be great.

Thanks DrNate, Yes I agree that is what I probably will have to do, but in the mean time. I have the green impellors already. I don't understand why the drain pumps won't work also. is everything controlled through the sprinkler valves?

there are no fuses. only resettable circuit breakers under the dash. found nothing tripped

ok the hunt is on!

I have a 2011 SV240 with the PCM 409 engine. I'm getting an Engine code DTC 686 " Power relay control ground short ". Engine seems to run fine, but I have not had it out on the water yet. any help out there would be greatly appreciated. thanks

Hi DrNate, how did the fin repairs turn out. subject change : is there a way to increase the brightness of the Provision screen , mine seems really dull, especially in bight sunlight. many thanks

ok 4" is the magic number from back of front fin to front of the back fin. I know this is off the topic, but what are you running in your boat for ballast system set up. thanks

I can measure up my boat this week end and get the measurements

New to the Crew. I have just purchased a slightly used 2011 Enzo SV240. unfortunately the guy has lost all the manuals for the boat. can any body tell me where I can download or purchase manuals on how to operate the LED screen and the Pro Ballast pre -set system. also what are the size of the quick fill tanks and mid locker bags. many thanks

ok HOw would I tell if I have gen 1 or gen 2 dash. did you buy your 240 new. did it come with any manuals on the operation of the soft keys for the dash.thanks

new to the Crew, I have come over to the other side. sold my 23 LSV and just bought a 2011 SV240. of course the guy has lost all the manuals. can't seem to find any info on operating the Pro Vision Digital Dash. can anybody out there help me. if a Crew member has a 2011 0r 2012 set of manuals that I could borrow to copy that would be awesome!

currently the boat came with a 1591, which I find really weird for a Surf boat. 14" dia by 16'" pitch. I was thinking of trying a 5 blade - 2133.

awesome, thanks, going to try something tomorrow morning, get out the wetsuits!!!!. curious what prop are you running. thank a bunch

ya exactly, I know the Bu and the Enzo have a tolally different hull design. sound like you still need to lean the Enzo over to get the best wave.

I know I have a bow sac and 2 sac's under the mid side seats. I was told there is a tank under the floor, but have know idea of the sizes. I was planning on adding 800's in the back lockers.

Ladner Slough, Osoyoos, Blue and Grey

ok thanks , that is what I kinda of figured, But I like to study how it all works. ok I have a lot of questions Dr Nate. What are the size of the tanks? I thinks I have 3 quick fill. and 3 PNP, or they call it Pro Ballast upgrade.. What are you running for best set up. many thanks

Funny you should ask, I have been speaking with Josh Wilhelm at Wake of World. for my boat he recommends the WOW300 which suction cups to the side of the boat. He says if I'm not completely satisfied , He will refund 100%. I like the idea of loading up the boat evenly and just switch device from side to side. I just sold my BU 23 LSV and we ran over 4,000lbs of ballast evenly with a "Wicked Wave" and it works awesome. So now with the new to me SV240 I'm looking for something the same concept.

ok Sorry, not sure what to do here. I just created an account. I clicked on the link and nothing happened