Jump to content

dejoeco

Crew
  • Content count

    329
  • Joined

  • Last visited

  • Days Won

    5

Everything posted by dejoeco

  1. The shifter on my 2014 SV233 works fine except for the button the you push to keep the throttle in neutral in order to rev the engine. Is there an easy fix? Frankly, I seldom would need or use this feature, but I would like to have it working.
  2. I have a 2014 sv233 and continue to love it. I need some upholstery work done and I was thinking of adding a step to the rear center cushion for people to step on as they get ready to ride. Has anyone else done this? If so, Please forward some details and or pictures.
  3. I am a person who is always looking to make my boat's wave better. I love my 233. 6-7 peeps along with my normal ballast was GREEEAT. The goofy wave is always just alright as compared the regular side. Anyway, I tried one those suctions systems. I have used the Mission Delta and the Tsunami by Agenda Surf. My first attempt was with a borrowed Mission, but I decided to purchase the Tsunami from Agenda. Similar results with both although it took me a couple times to smoothly install the Tsunami. The wave was AWESOME, best ever. I could ride faster and the push was fantastic, especially from far back. This with just two people in the boat. In addition, I was running the RamFil at 70% along with the hard weight I have stashed around.
  4. I had my valves switched over to Valterra a long time ago and have had no issues. When I put the boat on the lift, I put the boat in trailer mode and leave the valves open. I heard this was the thing to do, right? Is there anything else I should be doing to prolong the life of these valves?
  5. Thanks NW! I leave mine in the open position while on the lift.
  6. I did not take any pics and I need to. I won't be heading to the lake for a couple weeks. Jackie graduates this weekend with her doctorate and visiting oldest daughter in Jersey the following one.. I used it this past weekend with a full crew and I am not sure I like as much as I do with a small crew. It was hard changing settings and emptying weight with RamFil is hard to judge since it is on a timer.. The 233 is more sensitive to shifting weight and bodies than the new RI series. My rpm's are significantly higher with all the people.
  7. It is my understand that the hulls will be the same as the RI series. The FI can be bought stripped down giving Centurion a boat to compete in a slightly lesser market.
  8. I can say that the Tsunami has three positions for potential set up. I have not used the setting with the least angle. (the furthest from 90 degrees) Yes, you use more gas and run at higher rpm's. The are many on the market and for 200-250 you can get something pretty nice. The Tsunami came with a leash. IT currently does NOT float, but I think they may be working on a floating model. This is not an issue with the leash.
  9. I have the front bag full and have an additional 150 under the removable cushion.. I do not have plug and play in the rear so I have about 400lbs of hard weight on each side and RamFil to 70%. Trim anywhere from 20 to 40%. YRMV I used to ride at anywhere from 10.9 to 11.1 and now I am at 11.3-11.4
  10. This past weekend I had an interesting set of events. While surfing, the engine warning lights came on as the engine was overheating. I found that the serpentine belt completely disintegrated causing everything to stop working. Anyway, I located the size of the belt and found and exact replacement at the local NAPA store, but it did not fit. I know it is the right size and the belt was tight but short. NAPA had another that was a little more than an inch longer, but that seemed to be too much. Advanced Auto had one that measured about 1/2" longer and It fit just right. I left the boat on my lift and ran things for about 30 minutes and all was good. I turned everything off and re booted and all warnings were gone. The cowling covering the serpentine belt had one bolt holding it in place. I am not sure that happened to the other bolts. This was the likely culprit that led to the belt issue. I left the cowling off for the time being. The bolts holding the cowling in place are specialized and I am looking for replacement bolts. Anyone have an idea where to find these? Anyone had a similar belt size issue? Spec was 13/16 x 91 1/4 >>>>> I used a 13/16 x 91.8"
  11. I think I did get most of the pieces up. All is functioning well. thanks
  12. Two years on the Valterras and no issues ....... knock on wood!
  13. There are no holes to plug. The wing part was free from and attachment. My good friends at Phase 5 have the same boat you have. They started using the Mission Delta wake shaper and their wave cleaned and got really good. This is what I would do and not cut the plate.
  14. The asymmetrical plate came on my 2014 model, but not on the 2013 I had. I cut it off on the 2013 and all was good, I would see what it is like with what you have first and see if you like it. Once cut, it is cut. It is easy to remove and it cost me about 50 to have it cut
  15. New 2013 SV233 Owner

    I borrowed a Mission Delta just to see what it would do and it was outstanding. A longer wave with more push. I found myself going .3-.4 faster in speed. Easy to catch up from way back.
  16. New 2013 SV233 Owner

    It is a wonderful boat to have. I have loved mine a lot. Something to think about..... I have RamFil and CATS, but I tried weighting my boat evenly and use one of the aftermarket systems that attach to the side of the boat. It was unbelievably good. Knowing this, if I had a boat with out RamFil, I would weight the boat evenly and use this to surf. I borrowed and Mission, but have since ordered a Tsunami for Agenda Surf. I feel your pain. I took up wake boarding at 52 and it can hurt. I surf now.
  17. My understanding is this is a universal issue with these types of boats. I have found the best way is to know your boat and start with a full tank. Weight in the rear and or listing the boat screws with the gauge at best.
  18. 2014 SV233 with ramfill

    I have posted about weight before, but I use weight plates from a basic weight lifting set. Readily available and can be potentially bought from Craigslist cheaply. I have use 25#, 35# and 45-50# weights. I cover in a heavy duty plastic bag and wrap with water resistant duct tape. The 25-35 weights fit nicely in the sides that have so little space. I do not have sacs in the rear just hard weight so I can use the area for storage.
  19. I installed a less expensive battery charger from BatteryMINDER and I have been very satisfied. It has been 2.5 years and all has worked great. the chord just run in my boat and out the rear cleat zipper next to an outlet. I also plug in a small fan/dryer to reduce any moisture inside. I always put the boat up with all cushions off and areas open to help facilitate a completely dry boat. Both items plug in at the same location. Anyway you do this, it is a great addition!!!!
  20. I recently installed FAE on my SV233. I do get some spray, but not significant. I haven't surfed enough lately to say I have put it through the ringer to know the complete picture. I am on spring break next week and hope to really test it out. I would recommend through bolting the attachment even though it is a a little more difficult to install. (not significant) I did it and would do it again. Like a lot of things, if I had to install again I could cut the time in half. Definitely less motor noise.
  21. Hello all, I have a sv233 with the stock Clarion m303 stereo. I have been having difficulty with the pairing of Bluetooth and I just realized that the 303 not iphone 6 compatible. I want to upgrade and make it easy to do. Is the Clarion M505 a decent choice? This model is supposed to have improved Bluetooth sound. I am running two wetsounds amps into rev10's and in boat speakers. Any assistance is appreciated.
  22. Just to report.... my issues cleared up with installing the firmware/software upgrade to my 303.
  23. For those of you who add lead. This is something I did with my Enzo. I took Olympic plates 25-35-50 lb weights and put a plastic wrap around them and the wrapped in waterproof duct tape, The beauty of these is they can lay flat under a sacs and fit into small thin places,
  24. I am pretty certain you can remove the one from the boat and take it to NAPA and they can match it.
×

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy..