tayborg

Yes it moves visually and I can hear the electric actuator.

New-to-me 2014 FX22 has CATS that cycles from zero to all the way left and back to zero when ignition is initiated. Provision shows the green CATS position indicator sweep left and then back to zero. After that, there is no movement whether using the turn signal or the touchscreen arrows. However, both of these methods register movement by the little orange indicator pointer on the touchscreen but no movement by the green position indicator nor the CATS itself. Batteries are good and circuit breakers are good. I spoke with Tim at Ennovation Controls (mfr of the proVision) and he said the signal from the touchscreen is working as evidenced by the cycle movement at ignition startup. Not sure where to go next. Does anyone have a digital copy of the owners manual on the touchscreen?? Note: wake plate works fine in all respects. Any help on this would be appreciated.

I have an 07 Enzo SV230 with stock gauges. The temp gauge and volt meter gauges do not register anything. I have checked the wiring on the back of the gauges and they are pin connectors which look to be in good shape. Anyone know where the sensors are for these and how to chick if they are working or not? Thanks in advance for your help.