Erksonray

Thanks for passing on the boat...I love it!

Ditto? Please...

I agree with everything above...the SV244 is an amazing boat to surf behind.

15W40 Rotella or something else???

I use this and it keeps the bilge at a constant 40 degrees or so...http://www.westmarine.com/buy/caframo--pali-bilgesafe-heater-400w-with-thermostat--12960282?cm_mmc=PS-_-Google-_-Shopping_PLAs-_-12960282&adpos=1o5&creative=54604289524&device=c&matchtype=&network=g&gclid=CJS1ku6-6sgCFUqRHwodqiAGrA I've seen it much cheaper. e

Phase 5 Wire is the best thing I have ridden to date with regard to wake surfing. I worked with a shaper on two custom boards with no luck. It took me 30 seconds on the wire to know it was the board for me.

I almost got one of these...https://eriewake.com/ but I ended up with a Phase 5 Wire 53" http://shop.phase5boards.com/products/wire-surf with these fins http://www.surffcs.com/shop/sup-surf-fins/3ds-large-side-fin-set and fit my style and needs pretty well. I may end up adding a thruster/trailer (third fin). I had a couple of custom boards as a collaboration project with local shaper I know but they do not compare to the Wire. It a solid board and super light. 1500.00!?! for one board, geesh.

The 53". I ride behind a centurion 244 and a supreme S21

I have it and love it. I am 180ish and 5'11". It surfs like a longer board than it is because of the blunt nose. I've had a couple of custom boards made for me and I like this production board the best.

Nice! Love my Supreme.

On my S21 I found that Quicksurf is pretty amazing with both sides of the plug and play filled and the surf side quickfill full. Yes it still leans but and it leans even more with the plate deployed. The ability to adjust and dial in the wave is limitless. Only beginning to scratch the surface with this so far so good.

Moomba ='s spider cracks...stay away...stay far away.

We don't have elevation in Virginia so Sac it however you want, I did. It was my boat so I should know. I never had an issue with the 303 of any kind pulling anything or anybody. It's a great boat.

from another thread- I drove this boat for a few pro friends of mine and my daughters boyfriend Parker (James Walker, Sean Cummings, Parker Payne, and Jason Lybeck) earlier this summer when we were practicing for the competition at my local lake in AZ. You are pretty close to having it dialed but there are 2 things that the S21 doesn't like, one is bow weight and the other is counter weight. Like Boot Juicer said (and I used to have a V226 as well) take out pretty much all of your counter weight. I wouldn't run more than 200 lbs of counter weight on either side. I also noticed that the starboard side liked 100% trim and the port liked 50% trim. I ran the surf side quickfill full, surf side pnp full, and a 400 lb surf side under seat bag full, along with about 200 lbs of counter weight at 10.6 on port and 11.2 on starboard. Here are some videos and pics of the wave with that setup. all are on a 2014 S21

We can't wait to see our new Supreme that we are closing on tomorrow at the Richmond Boat Show. Thanks Joe!

Moomba has one too http://us1.campaign-archive1.com/?u=a8e01e206bf7bb07c531ae976&id=9025f86ef5

Nice, I'll check out the new James Walker boards.

No way, the boards are made overseas. There are plenty of talented shapers here in our great country. Inland Surfer sold their souls to make more $$$. Surfing is all about soul. To me there is no soul in a board made by people who have no idea what surfing is.

No worries...I stoked. It will be worth it...Fineline would not have made it if it was not worth it.

No worries...I stoked. It will be worth it...Fineline would not have made it if it was not worth it.

A friend had one on his 233 that he sold...he kept the plate and gave it to me. We are getting it cut to fit the slightly smaller S21 plate.

Thanks NW for testing and reporting...Oh the drama. We are so stoked to be getting a Supreme S21 with Quicksurf, Quick Fill, Plug & Play (750's) and an A-Plate. Can't wait until Spring! Stokamoka and not looking back.

Overby Marine, my awesome dealer finally determined it... the boat was boiling water in the manifolds.

This same thing happened to me and it ended up being my engine water circulation pump and not the raw water pump. I am not sure if there is one on the Merc but this is what happened to me on a PCM 303.

2013 Centurion Elite V - boat ran great all week while on vacation with no issues. After sitting in the lift after vacation we went to use it. Idled over to where we were going to surf, got all ballasted up then started surfing and with 30-40 secs we got the alarm and the guardian kicked in and brought the throttle back down...we then idled home. I had the impeller changed and tested it the code came back once on plane. The ECM reported both manifolds overheated but the weird thing is the temperature that was reported is 154.2 degrees @ 2500 rpm. What are my next steps...blockage, bad sensors? Frustrated with this boat.