ericl11

Made a nice difference and cleaned things up. I still would like to lengthen it up a bit. Should I move some weight more forward or speed it up a notch or two? ZeroOff set at 11.0. I'll try to post pics with settings.

10.8-11.6. I started getting size and push but just wasn't clean and long enough. I have 200lbs of steel under each pnp bag another 150 on port side and 250 starboard as far back in the lockers as I could get them.

if the Delta is close to Ocala fl then yes. Sent from my iPhone using Tapatalk

I'll give the settings a try. Will spreading the steel along the starboard side lengthen the wave or should I keep everything closer to the stern?

If yours is the exhaust through the plate... brilliant! Now gotta find someone at least twice as handy as I am to make that work for me.

will do. Sent from my iPhone using Tapatalk

anywhere from 10.8 to 11.6. Trying to work up to the higher end of that.

After adding all the weight this weekend and sinking the platform. I had exhaust kicking almost directly to the surfer. Anything I can do to eliminate or minimize? Sent from my iPhone using Tapatalk

Got a couple quick pics in with tapatalk. Any suggestions are appreciated. Also exhaust was an issue, what needs to be done to redirect from the rider?

Sent from my iPhone using Tapatalk

Posted settings in the [Official] 2017 Supreme Surf Ballast/Tab Setup Thread but having trouble uploading a picture. I put in on Lake Minneola in Clermont (tannic water, about an hour away, local lake is too low). If I get the picture up you'll see the wave starting to take shape. My daughter (110lb) and I (190lb) were able to ride without a rope. It was more work for me though. If I get the picture up you'll see the wave is still smaller that some of the ones I have seen, not as clean and it is much shorter. I didn't ride listed since I had 100lb of extra steel ballast on the port side and 4 passengers (maybe 450 lbs) that I could move around. Hopefully the pic will get up soon so I can get some support.

Reference Checklist 1. Boat Model: 2017 S238 2. Regular or Goofy: Regular 3. Bow Ballast Percent: 0% 4. Mid Ballast Percent: 100% 5. QF Port Percent: 100% 6. QF Starboard Percent: 100% 7. PnP Port Weight: 100% upgraded 750 bag 8. PnP Starboard Weight: 100% upgraded 750 bag 9. Other Ballast Weight (ie. Lead): 800lbs: 200lb under each PnP bag. 150 in starboard locker 250 in port locker 10. Number of Crew and positioning: 6. all over the place can't keep them still. 11. QuickSurf Port Setting: 0 12. QuickSurf Starboard Setting: 45 13. Stinger Tab Setting: 20 14: Picture: Having trouble uploading try again in a few.

Sent you a PM.

Thx. You're right I did forget the center and had the QF tanks wrong. So that should now put me at 3800 for the surf wave (bow PnP empty).

Yeah I know. No Prob. I did order 800lbs of weight bags. I'll put 100lbs under each PNP bag and 300-400 in the port locker and keep 200-300 to move around. Unless someone tells me different. I got the wakeballast steel shot bags so I can tuck them in crack and crevices and not lose all my storage. I'm a little worried about rust. Anyone do anything with these? Big Ziploc for extra reassurance? I should now have: QuickFill 750lbs PNP Bow 500 PNP upgraded sacs 2x750 = 1,500 weight bags 800lb 3,550 avail or 3,050 (with empty PNP bow) to surf. Hopefully move to the other thread and post results next time.