7.5unlimited

Can you share the specs on where you got it from and numbers? I have been looking for a couple years now.

Following and interested in a set as well.

Any updates on finding new ones? Mine went out last year and trying to decide if I am going to pull the system or replace the rams.

I ordered my new cover from Savvy Boater last year. I couldn't be happier with the quality and fit and it covers the swim platform as well! Price was under half of what a custom cover was going to be.

So I have been through every post I could find through the search but nothing that is exactly like my setup. Our Enzo is a 2006 sv230 scorpion 330 motor with the full length bag on the port and an 1100 bag on the starboard and switchblade. The boat currently has a 817 prop which is a 13.5 x 17.5. We are at 5200ft and it is a complete dog. Looking at everything I believe an 1619 or possibly a 1433 might be the ticket but only have 5/8" clearance. Anyone have some experience that would help?

So just to follow up I spoke with Wake Makers, Nettle, and Acme and all recommended the 1619 for my application. Should be here on Friday so looking forward to getting it on and getting better performance. I was at the point on selling the boat and finding something else due to everyone talking about the wave on the Enzo. So far my experience has been quite the opposite. Any tip on getting it dialed in would be appreciated as we are spending the next two weeks on the water.

Thanks guys for the responses. I will give Nettle a call this morning to see what their thoughts our but leaning towards the 1619. Yesterday while on the water I could hardly get to boat out of the water with 12 people onboard and no no ballast. Topped out at 25 MPH turning 3450 RPM's. Didn't relieve how much heavier this boat was compared to our old Avalanche.

Now that our Avy has been totaled out it is time to get back on the water. We are looking at a 2005 Enzo and a 2008 V232. Help school me on which direction to go knowing that we surf most of the time. V232 has about half the hours but both boats looks to be in excellent condition and price is about the same. Is there any others that I should be looking at in a 23 plus ft range? Loved our Avy but looking for something that is a little bit bigger and less weight sensitive. Thanks for any advice. Cheers

Both boats they are asking around 35k for them. Still have my feelers out for other good deals as well. Great info on Supreme as I had thought Fineline owned them by then and was under the same umbrella.

Great information guys thanks. Does anyone know for sure how different the hills are on the Supreme?

Long story short is that we had a 100mph wind storm in our area a couple weeks ago and the house down from our storage area had their roof blow off and carry over 75 yards and land on my boat. Interior is toast, tower snapped like a fresh green bean and the windshield and frame is next to nothing on one half. Luckily the fiberglass didn't take to bad of a beating other than some blemish that a new gel coat will fix. The biggest issue that every company is running into is finding a new windshield frame and glass. It is a 2004 Avalanche and of course no one has one anywhere including Centurion. Does anyone know where I could look or have a custom one made? The but only has 200 hours on it of which most was put on by us in the last three years of owning it so I would rather not let the insurance total it out like they are wanting to do. Thanks for the help.

Yes you must remove it. Not sure how you would build the skeleton with it on anyways. Seen a couple people shrink wrap boats without the skeleton being built and windshield popped over the winter from the tension. I have done my own for the past seven years.

Pictures please.

X2 as I am 6'4" and my Centurion Body Glove vest has fit me the best of any to date.

Ok so we have been plating with this for a year now and have a decent wave put can't seem to get it to clean up. Here is what I am running and open to any and all advice. 2004 Avy 1100 in each corner. Only fill one at a time 580 under the seat 250 in the center 200lbs lead in the nose. As you can see with me in the picture I have two people on the rear corner and the plate all of the way up. speed is at 11.2. If I speed it up or lower my plate I loose all push and can't stay in it. There is so much wash at the top of the wave it is difficult to do much as well. The second picture is my 10 year old son. Same placement of people but me in the driver seat, 11.5 speed and the plate at 3/4 down.

Thanks for all of the help. To clear a few things up. No we are on a lake. Average depth is 126ft to 250ft deep so shallow water is never a issue. I don't run any counter weight other than the wife driving at 110lbs. What do you guys use to check your gas speed. Phone App? Sounds to me like I need to add a little more weight. I have a 450lb sac that I could put on top of the seat? Kris on the forum here made me a a A plate that is installed. It does a great job as you can see in the second photo with my son but with me I loose all of the push from the wave. Kalidgh your son looks like he is about to get it and your wave looks great as well.

I think the speed is accurate as I have a Star Gaze perfect pass installed. We are running a 911 prop as I we sit at a mile high in elevation. Lifesvr do you have any specs on how you built your surfgate? I am open to anything that will help clean this up as I see everyone else's waves and am jealous!

We purchased the new Slingshot board for our kids last year and they have never been able to pop up and have control like this board allows them. I went now and got one for myself as well and the feeling is night and day difference from any other board AI have ridden. Just my 2cents worth. Good luck

Couple of new ones in the Colorado area. http://denver.craigslist.org/boa/5017893331.html http://denver.craigslist.org/boa/4978568044.html

Look great more info please.

I put new shoes on the trailer this past year. I went to my local discount tire and had them measure the fenders and all to see what would fit. They ordered me what I wanted and blew any pricing I could find online and then threw in a full lifetime warranty as well.

I haven't seen anyone post up about these so felt like if you haven't seen these then cheers., Yes I know I may be over board with all of the Centurion extras that I have but couldn't resist. I have to admit though that it might just be the most comfortable jacket that I have worn yet. It is longer than any others I have worn and covers the beer belly yet is very light weight and doesn't feel like I have a vest on compared to the three other vest that I own from high end companies.

Many items but as of right now I have 4 Johnson pumps sitting in the garage collecting dust since this spring.

Programmed and fully deleted. We are at high elevation and in the mountains as well.

We are getting great mileage out of our cummins. 2011 ram 3500 35" tires 22-23 normal 18 pulling the boat 14 pulling double with our 36' fifth wheel and avalanche behind it. 18k between the two