WakeDirt

So I have been battling with a check engine alarm ghost (I’ve heard of some others that could never get theirs solved) but in other news I took it out to lake test after I did a tune up, so far it has new plugs, cap, rotor, sensor for the rotors or ign sensor inside the cap, new map sensor and 3 new O2 sensors. It ran fine for about 25 30 min then began idle rough and wouldn’t hold a constant high rpm either, it sounded almost like it was missing. Spark adv on my scanner said 4.5 to 5 deg, and was showing some miss fire bumpers on cylinders. I added good premium fuel and check the fuel filter which is new and it has a new fuel regulator....vacuum line from regulator looked good also. It’s only throwing 1 code, which is Cam position sensor fault, I replaced it, same code almost immediately, tried another new one with shims, no dice.... any body experience this before ? Sounds like timing which I know the cam sensor and ign talk...but I am not able to figure this puppy out. Any help would be appreciated before I go to the shop !Thanks! Travis HPM you may be seeing me reeeealy soon ha ha 7073543601 text if need be

Looking for replacement canvas only and a boot, any leads for a reasonable company? Sorry no pics having issues with my attachment quota, it's a 2012 v226 with the cast tower. Also it has the tower lowering t handle shafts with a notch/pin on it, haven't been able to find those o line either. Tower looks like this one https://www.onlyinboards.com/2013-V226-for-sale-Santa-Rosa-California-88137.aspx

Thanks!

http://www.centurioncrew.com/index.php?/forums/topic/660-my-94-falcon-v/

Hey bro!! That’s my boat! If you can’t tell by my avatar/profile pic Hit me up if you want to know anything about it, I did the tower, fae, seats, steering wheel, pulled the decals etc..and put a new ignition and distributor in her. Super stoked to see it has been babied like I had her, very happy to see! I have a matching big brother 5 boats later ha ha, even named it #2 after her.

I know it’s an old thread, but any one have any luck with a shaper? My boat came with a mission delta and was curious if anyone had tried maybe some more bow weight? I have the hard tanks which I am going to leave in and 1100s on top but guessing they prolly only get 800ish?? Also plan on adding about 150in each rear corner and 150 in the bow center

https://modesto.craigslist.org/search/boa?query=avalanche

I was looking to get a asymmetrical plate for my avy, and found a guy on MB Owners that made a plate for his brand new MB. Well I am very happy I stumbled onto this deal! I am excited to get it mountex, he made it and shipped in in a day! I will ask him if he is cool with me posting some contact info on here, super nice guy.

What are you trying to show in the pic?

It also depends on boats hulls, weighting, etc. I know that many boats don't like a wing at all, just a standard tab for wash (mb). I didn't want to risk testing a double wing, as my goofy (I'm right hand rot) is already perfect ha ha

Prop rotation will naturally make the wake clean to whichever direction it rotates, so having a wing on the offside will clean the opposite side wave, I would imagine a wing on the "good side" or ration side would only make the good wave worse with these setups, my mb liked just a regular wake plate, it was clean on both sides.

I had that exact kit on my mb 23ft b52.

THERE IS NO HYDRAULICS WITH LENCOS. Lencos are electric worm gear actuators. All you need is a 101 actuator, mounts, adhesive, 20' of wire and a switch. Google is a hell of a drug, there are hundreds of Lenco installs on the internet

My Fixed was also mounted underneath originally, I filled the holes with 4200 and mounted on the transom. I didn't want any "stowed lift" while the tab was set all the way up, so I opted for transom mount.

Well, sadly I don't have an answer, I installed it later in the season, and between drought and my busiest fire season to date here in cali, it is untested. We went out and didn't get to surf the last trip out. I will update asap!! I do know my goofy wave is amazing ruth the right hand drive right now

My boat is right hand drive so my wing goes to the right, I belive he sold nick the one in the photo above and made mine right handed.

Ya the guy was able to etch anything you wanted, it was pretty cheap too. I imagine he has raised his price by now ha ha

Nor Cal is doing great, hopefully there is snow in the hills till spring for a nice top off.

Well I guess that's 1 point for the sealed enclosure guys....

How long did it sit?

I sold my last 2 boats to guys in the PNW ha ha! Are you and your fam goofy riders for surf? My boat is right hand rotation. Makes a killer goofy wave.

Where are you located? I may be looking to sell my 09 Avy

When you pull a rudder do you need to replace any type of seal for re-install?

Hey Bongo do you guys go out much in the winter on CL? I know this year isn't looking so good due to levels, but temps don't get too bad over there right? I wear a 2mil on mendo when it has water.

You're saying to run the Arc 600.2 in stereo for the towers? Or stereo for the inboats?