Jump to content

rick9021

Crew
  • Content count

    99
  • Joined

  • Last visited

Community Reputation

0 Neutral

About rick9021

  • Rank
    Weekender

Contact Methods

  • ICQ
    0

Profile Information

  • Gender
    Male
  • Location
    Quincy, WA

Previous Fields

  • Boat
    Centurion Enzo SV230

Recent Profile Visitors

2,948 profile views
  1. Only with engine running. And the long beep for me occurs after long idle then 1 short beep every minute. Somebody did mention display in another thread somewhere. Live to hear what you find out about that. Thanks for the reply
  2. Brand new impeller,,,,,,, didn't fix two new batteries, no luck,,, since not throwing a code, thinking it is electrical somewhere? Hard to imagine I am the only one to have this happen and Centurion has no idea what a long beep followed by a short beep every minute means!!!
  3. Put the boat out on the water this last weekend. I thought maybe when I put the boat into the healing garage, when I pulled it out this year there would be no beeps.........wrong. Still no idea, maybe reduced waterflow from the impeller? I replaced it two years ago, thought the old one had all its pieces, maybe something came off and is in the cooling system? Everything reads good, no temp increase at all,,,,, same symptoms as last year,,,,, new thoughts? Thanks everybody
  4. I have been able to connect it to a computer and the computer showed no faults. And my screen has never showed any warnings at all. I will continue to try and let everyone know if I can find a solution. Thanks for the reply.
  5. Hoping the experts might be of help here. I have a 2011 SV230, with the 343 engine. Initially the single beep occurred at low rpm while filling ballast. The beep was a single beep every minute. I pulled up the diagnostics page on the dash and it did not show any faults. I shut of the batteries to try to reset the ecm...? (read on internet) let the boat sit for about 10 minutes with batteries off. Started it up and no beep for a while, first time went 4 hours without beeping, once it beeped, did the reset again and then went about 20 minutes or so before it started beeping again. I checked engine oil and transmission fluid and both were good. I pulled the cover to visually check the fresh water impeller, ( lots of milfoil here in the columbia river right now) impeller was clean. Voltage while running and at idle is anywhere from 13.4-13.9. I have two batteries, haven't checked them individually to confirm they are both good, but thought I would see something on the charging side if one wasn't ? Had a friend hook up the computer to see if he could find any codes that might not be showing on the engine diagnostics page and there were not any he could find either. Talked with the local shop and they basically have no idea! So, what should I look for or try next? Any help is greatly appreciated!!!
  6. Thanks CentruionSkier, I will check that out. Don't recall seeing any boxes in the rear area at all. Will check closer tho. Thanks.
  7. i didn;t know about the override!!! Might just test it out today, will look up your thread. Looks like it should be upper 70's here, almost getting hot out there! Thanks Nate! R
  8. Hey all, Tried to work the quick fill valve on my SV230. Didn't move. Switch lights up, pro vision display says it is filling, however no power is getting to the valve. I disconnected the power from the valve and tested there. Anybody know if there are any inline fuses or circuit breakers which might be popped? I did check the breakers on the starboard side under the dash, all those were good. Coincidentally, last year the same valve did not work, however the shop told me they replaced the whole valve assembly. Probably doesn't matter but thought it was interesting. Thanks in advance!!!! Rick
  9. WTB Wake surf Boards

    I too have a Surf style board available. ShreddStix Hazen...
  10. Also forgot to tell ya, with the bimini on, it cuts down on the view considerably. Pretty sure I have the 210.
  11. I've got Pro vision 2 on my 230+ and have a wide angle camera attached to the underside of the tower. Not too crazy about the camera I put there, I believe it to be too wide of vision. Mine is a Kenwood of some sort. Display is fine for just kind of watching, but I would like to get more of an upclose of the surfer. I put mine on so I could see the rider without a big mirror on my windshield.
  12. New ENZO SV233

    Wow. Love the boat!!!
  13. Not sure if you still need pics, but here is my install..........................
  14. We splined it!

    LOL I forgot, if there is no video, it didn't happen!!
  15. We splined it!

    Nate, you might try running a longer rope and pick the speed up 3-4 mph. At that we can throw rope in and ride fairly normally, We do that alot with another avy and find at the increased speed and further back both waves are good until they meet, we ride from one boat's wake to the other boat, sneak up and grab an adult bev from the friends boat and then ride the spline. You are right, great fun!!!!
×

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy..