Curtis
Crew-
Content count
7 -
Joined
-
Last visited
-
Days Won
4
Content Type
Profiles
Forums
Gallery
Member Map
Store
Calendar
Classifieds
Everything posted by Curtis
-
I converted my 07 Enzo SV230 to fresh air exhaust, and removed the switchblade at the same time. Because of this, I have the muffler, the corsa exhaust parts with flappers, and 2 Lenco actuators from the switchblade. My question is, are these items worth trying to sell, or should I just trash them? I guess the only value would be from someone with a similar boat that needs to rebuild their stock setup? - Curtis
-
Angle grinder with a cutoff wheel. Then smoothed it out and polished it up.
-
I did the same thing. I keep my boat in the marina for 6 months out of the year, and hated carrying the switchblade around all the time. I might be inclined to keep it for special surf days if I was trailering all the time. Beware that the Switchblade plate may be structurally bonded to the hull in addition to the bolted joint. There's a big risk that you can damage the fiberglass (and not just Gel Goat) trying to remove it if it was bonded with permanent adhesive. I opted to just remove everything from the switchblade setup except for the plate. I just cut back the vertical support mounted to the plate to clear the FAE. Should help reduce the spray I was getting from the Switchblade apparatus when it was unused.
-
Yes. Big fiberglass tube.
-
See PM
-
Thanks for the heads up. The actuators to switch sides definitely work. I used them all last summer and just took them off the boat. I'll put them up in the Classifieds.
-
I'm located in the middle of California. The muffler would definitely be too large to ship, but the other parts are pretty small. Good call though.