Leaderboard

We brought home our 2019 Fi25 last week and had our first session the day after. I consider myself lucky to score a session on a new toy the day after I get it. It doesn't always work out that way. One result of that quickness to rally kept me from having the opportunity to mount the rear view mirror which came with the boat. That proved to be a challenge as we tried adjust the surf settings without really being able to see the wave change. I am not a fan of mirrors clamped on the windshield anyway and wanted to try a rear view camera instead. That is the upgrade that this first post is about. We purchased a rear view camera and display on Amazon a few days before picking up the boat from NWBS in Oregon City. https://amzn.to/2DEgZTg I spent some time figuring out how and where to mount the display above the OEM dash in good view of the driver without blocking the view in front of the boat. Scratched my head a bit, took some patterns, did some CAD work and machined some parts shown below next to the display for the camera. Figured out where to place the camera on the back of the boat. Wire was run along the right side under the seats. Then continued to fit the CNC'd mounts to the dash. Happy these were a perfect fit right off the bat. This step usually requires some iteration of CAD tweaks and CNCing of more parts until the fit is right. A bit of skill and luck this time around. Used some 3M VHB to attach the mounts to the back of the display. This camera is designed with some straps that normally wrap around a rear view mirror. I trimmed those off and removed the pads that rest against the mirror surface. That is were my brackets attach to the back with the VHB. Then I mounted the camera on the dash. I will add some VHB between the mounts and dash to hold it in place. This was just a test fit to verify the position. Here is the view from the driver seat. Back of barn and CNC machine are shown in the image. We will have to see if this is angled right when on the water but think it looks pretty good. Note that the display is actually upside down. The camera is designed to be mounted above a license plate on the underside of the cover that normally is above them. Having the display upside down actually improved the wire routing which I still need to clean up a bit. So this all worked out for the better. This camera also has a built in front view cam which can 'see' through' the windshield but we won't be using that feature. It can record and do a host of other things which may be fun to try. We can actually record our sessions on a thumb drive so that might be cool. It's 1080P so resolution will be pretty good. Will post some videos when we get a chance to test it out. All the best, Hein

I can't wit for your review of the Camera. I thought about doing that on my boat. I have a camera I installed on my Motorhome and have cameras factory installed on my truck and wife's car. I have glare issues...not sure if it is just my eyes getting old or what. Screens mess with me a bit so I am curious how you will like the mirror/camera in the sunlight. Your installs are top notch.

Hein, you are a beast! Well done, sir! Can't wait to see what's in store next...

Next project on deck. Actually below in this case... Bilge alarm system featuring a float switch mounted to a self-made ABS plate with threaded inserts that will be bonded to the inside of the hull with 3M 5200 adhesive. If the water level comes up to actuate the switch then a 90 decibel alarm will sound. Also shown is a small fuse for the system. I have a friend who almost sank his boat when a hose came loose and they didn't notice it until the engine was almost underwater. This might help to avoid such a scenario. All the best, Hein