Aft tower lights install

[SurferAdam 168]

Boat is a 2015 FS33. I bought a set of rigid dually marine LED lights I'm planning on mounting to the tower for night surfing. I'm wondering how to hook them up so the factory aft tower lighting switch operates them. Also wondering if the tower is pre wired for these lights.

[SurferAdam 168]

Got it. For anyone trying to do this in the future there's a small 8 or 10 pin connector located behind the driver side speaker under the tower in the cup holder area. Pull the speaker out and the plug is right there. Blue wire labelled "tower lt" and a black wire beside it which is the ground. Here's a picture of the lights and a picture of some chicks dancing on the boat at whitesands beach

[stoked 1,039]

Got it. For anyone trying to do this in the future there's a small 8 or 10 pin connector located behind the driver side speaker under the tower in the cup holder area. Pull the speaker out and the plug is right there. Blue wire labelled "tower lt" and a black wire beside it which is the ground. Here's a picture of the lights and a picture of some chicks dancing on the boat at whitesands beach

 

Nice!! Do you have a link for the lights you got? Have you tried them out yet?

 

my wife is in the room, good to see the suntan lotion usage...

 

 

 

 

Sent from my iPhone using Tapatalk

[SurferAdam 168]

I bought the rigid marine dually flood lights off amazon, they work great

[Shaka 146]

I bought the rigid marine dually flood lights off amazon, they work great

I have the non-marine version and agree that they work great.

[stoked 1,039]

I bought the rigid marine dually flood lights off amazon, they work great

 

Sweet! Were they easy to mount to the existing upper holder mounts? (Assuming that's where you mounted them)

 

 

Sent from my iPhone using Tapatalk

Edited July 8, 2015 by stoked

[DarksideR 1,679]

I'm on my way!! For the night surfing obviously...

[SurferAdam 168]

Sweet! Were they easy to mount to the existing upper holder mounts? (Assuming that's where you mounted them)

 

 

Sent from my iPhone using Tapatalk

Yup super easy just bolted them up

[SurferAdam 168]

I'm on my way!! For the night surfing obviously...

You should come up man

[volzalum 280]

What? No pictures of the plug? LOL

[Skibumm 184]

I'm thinking that these might be a good option if you could put on some sort of swivel bracket to face forward as well as backwards.

[DarksideR 1,679]

You should come up man

Thanks, but no idea where I'd stay. I'm sure all the camping spots are booked. Then there's the wife... LOL

[RhuntIII 555]

Very nice. Just one light or one on each side? And thanks now my neck's all jacked up! LOL.

[h20king 794]

Take a look at the vision X light's . They make a single pod that has a swivel and a ten watt LED they are super bright and the shape lends To boat install and fit the lines better than the square light's .

[Shaka 146]

I kind of like the way my Dually's look.

[h20king 794]

I like them as well but the vision x is a great option for those looking for a smaller pod with a swivel

[DarksideR 1,679]

I like them as well but the vision x is a great option for those looking for a smaller pod with a swivel

Which model has the swivel? Can't quite tell. Nice looking lights though.

[Wylie_Tunes 146]

I have the non-marine version and agree that they work great.

Per the Rigid rep, the difference is the black and white coating. Lights are identical.

[Wylie_Tunes 146]

I have the non-marine version and agree that they work great.

Per the Rigid rep, the difference is the black and white coating. Lights are identical.

[SurferAdam 168]

Per the Rigid rep, the difference is the black and white coating. Lights are identical.

 

They also come with all stainless hardware